design my flow

warp_zero · 06-28-2002, 04:55 PM

i will be runing:
dual waterblocks: http://store.yahoo.com/directron/gfvid.html
dual radiators: http://www.bulkparts.com/storefront.ASP?pageno=1106
? pumps: http://www.petsmart.com/products/product_795.shtml

how should i set up flow ( up to 3 pumps ) for this cooling system?

all cooling loops must be joined in some way

warp_zero · 06-28-2002, 04:58 PM

BTW i can (if necessary) mod the pumps for inline

redleader · 06-28-2002, 06:38 PM

Just get an Eheim, a heatercore and whatever waterblocks you like (though cooling a CPU with a Geforce block is probably a bad idea

).

You'll get much better performance then you would with that proposed setup.

redleader · 06-28-2002, 06:40 PM

Also, don't use that radiator- its way underpower and even worse made of Al, not copper.

Remember DO NOT MIX METALS!

warp_zero · 06-28-2002, 06:40 PM

um, you are probably a bad idea... i have to use these things because of some crazy space constraints ( like a flexATX case )

and i am betting a geforce block on a cpu is probably a really good idea because of their design and low mass

Brad · 06-28-2002, 07:23 PM

I'd just run it all inline, and one pump, if it doesn't cool well enough, just buy another pump

warp_zero · 06-28-2002, 08:48 PM

that is about what i was thinking, exept running the rads in parallel to reduce pressure drop

06-28-2002, 04:55 PM	#1
warp_zero Cooling Neophyte Join Date: Apr 2001 Location: A.D. 2101 Posts: 65	design my flow i will be runing: dual waterblocks: http://store.yahoo.com/directron/gfvid.html dual radiators: http://www.bulkparts.com/storefront.ASP?pageno=1106 ? pumps: http://www.petsmart.com/products/product_795.shtml how should i set up flow ( up to 3 pumps ) for this cooling system? all cooling loops must be joined in some way __________________ sub_light@yahoo.com long live TRAAM-II

06-28-2002, 04:58 PM	#2
warp_zero Cooling Neophyte Join Date: Apr 2001 Location: A.D. 2101 Posts: 65	BTW i can (if necessary) mod the pumps for inline __________________ sub_light@yahoo.com long live TRAAM-II

06-28-2002, 06:40 PM	#5
warp_zero Cooling Neophyte Join Date: Apr 2001 Location: A.D. 2101 Posts: 65	um, you are probably a bad idea... i have to use these things because of some crazy space constraints ( like a flexATX case ) and i am betting a geforce block on a cpu is probably a really good idea because of their design and low mass __________________ sub_light@yahoo.com long live TRAAM-II

06-28-2002, 07:23 PM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	I'd just run it all inline, and one pump, if it doesn't cool well enough, just buy another pump __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

06-28-2002, 08:48 PM	#7
warp_zero Cooling Neophyte Join Date: Apr 2001 Location: A.D. 2101 Posts: 65	that is about what i was thinking, exept running the rads in parallel to reduce pressure drop __________________ sub_light@yahoo.com long live TRAAM-II

06-28-2002, 06:38 PM	#3
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	Just get an Eheim, a heatercore and whatever waterblocks you like (though cooling a CPU with a Geforce block is probably a bad idea ). You'll get much better performance then you would with that proposed setup.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)