Am I insane? or just crazy (:

Volenti · 07-26-2002, 10:59 PM

The quest for ever increasing flow and pump efficiency has led me this, yes folks, that's one inch tubing and fittings

With 2 meters of 1 inch tubing I actually get the rated max flow rate from my pump! (2800L/H, 744GPH) The 90 degree elbows do hurt flow a little but are a necessary evil given how stiff 1 inch pvc tubing is, can you get tygon in 1 inch?

now all I have to do is make the block to suit

Volenti · 07-26-2002, 11:01 PM

Comparing the 1 inch fittings to the factory 5/8'' fitting that came with the pump.

#Rotor · 07-26-2002, 11:24 PM

enter the BIG GUNS>>>>>>>>

those fittings can very easily be 1" in diameter....

Volenti · 07-26-2002, 11:44 PM

hehe, a flow rate shoot out, can't wait

[4M]Mustang · 07-27-2002, 12:30 AM

looking at that last pic I think I gotta pee.......

Volenti · 07-27-2002, 12:50 AM

bah messed up image

Volenti · 07-27-2002, 12:54 AM

and with flow like that you can do things like this;

Sanjuro · 07-27-2002, 01:58 AM

Hello? hmale? kick this guy's ass with your Titanium Velocity!

Skulemate · 07-27-2002, 02:13 AM

Quote:

Originally posted by Volenti
can you get tygon in 1 inch?

Yeah, of course you can. It can be bought in sizes up to 2"x2.5" from the supplier that we use in our lab, and there may well be sizes larger than that even. For the 1" ID Tygon there are a few choices, 1"x1.25", 1"x1.375" and 1"x1.5". Only problem is, this stuff goes from ~$500-1100CAD for a 50' roll of the stuff (and I doubt that anyone will buy what you don't use). Perhaps if you want tubing this large you should look at Nalgene.

gone_fishin · 07-27-2002, 03:11 AM

OK Velenti, my curiosity is overflowing in a giant whirlpool

How powerfull is that pump you have there?

Volenti · 07-27-2002, 04:14 AM

Quote:

OK Velenti, my curiosity is overflowing in a giant whirlpool
How powerfull is that pump you have there?

It's rated at 2800L/H and 2.5m head, and get's almost exactly that through the 2 meters of 1 inch tubing, it drops to around 2400L/H with the single elbow feeding the whirlpool.

Though I thought that your pump was rated higher than mine...

airspirit · 07-27-2002, 12:35 PM

That is frickin' tight, man! All you need now is to hook that up to a 10' tall cooling tower (string it outside and scare the neighbors) and you'll be set. Heh ...

iceheart · 07-27-2002, 05:32 PM

That's SICK!

|PuNiSh3R| · 07-27-2002, 10:07 PM

That is wicked..

FRAGN'STIEN · 07-28-2002, 01:57 AM

Nice twister. It looks like we have a pepsi wannabe on our hands hehe

webmedic · 07-28-2002, 01:59 AM

Quick hook it up to a water block. Oh sorry there aren't to many people besides me playing with blocks that have that size of fittings and mine are mostly 5/8 not 1 inch. still it would be cool to see if it affects your cooling any. I've got a 740gph pump comming to play with myself.

FRAGN'STIEN · 07-28-2002, 02:01 AM

Quote:

Originally posted by webmedic
Quick hook it up to a water block. Oh sorry there aren't to many people besides me playing with blocks that have that size of fittings and mine are mostly 5/8 not 1 inch. still it would be cool to see if it affects your cooling any. I've got a 740gph pump comming to play with myself.

Which pump did you get?

webmedic · 07-28-2002, 02:04 AM

It's called the via 2600. On some sites I see it listed at 740 and on another site it's listed at 950. Noot sure which is acurate but if I shoot low and it's better well so be it. I can get upto 1200gph pumps. but i was kind of looking at not getting any bigger than the ehiem 1250 in size and the 1200gph pump may be a little bigger.

FRAGN'STIEN · 07-28-2002, 02:08 AM

Quote:

Originally posted by webmedic
It's called the via 2600. On some sites I see it listed at 740 and on another site it's listed at 950. Noot sure which is acurate but if I shoot low and it's better well so be it. I can get upto 1200gph pumps. but i was kind of looking at not getting any bigger than the ehiem 1250 in size and the 1200gph pump may be a little bigger.

Oh I found it. nice, and cheap too

gone_fishin · 07-28-2002, 03:49 AM

Quote:

Originally posted by Volenti

It's rated at 2800L/H and 2.5m head, and get's almost exactly that through the 2 meters of 1 inch tubing, it drops to around 2400L/H with the single elbow feeding the whirlpool.

Though I thought that your pump was rated higher than mine...

Yeah, mine is rated at 4315L/hr zero head 1" fittings, its rating at 6' verticle rise is 2400L/hr. It's max head is 15 feet.
You're not rising much in the pic, about two feet tops with the 6 feet of tubing, correct?

It came with a neat little chart, lets see, all with 1" fittings,
0 =1140gph
1' = 943gph
2' = 830gph
3' = 752gph
4' = 724gph
5' = 656gph
6' = 640gph
7' = 613gph
conversion factor for liters is .2642

Volenti · 07-28-2002, 07:50 AM

Quote:

Yeah, mine is rated at 4315L/hr zero head 1" fittings, its rating at 6' verticle rise is 2400L/hr. It's max head is 15 feet.
You're not rising much in the pic, about two feet tops with the 6 feet of tubing, correct?

Yea, I'm only at 1.5-2 feet of head there, the flow drops off pretty quickly if I lift the hose all the way up, I'll have to be aware of that when I put it into action.

Started on my 1 inch block, I'm using the base from the dual 1/2'' block and I've drilled a 1/2'' hole right where the core contacts the block, I've then inserted a truck load of thin copper wire untill the hole was packed solid, then soldered it up.

the last pic shows the wire all in position with the partially finished top of the block.

Volenti · 07-28-2002, 07:52 AM

It's done

Volenti · 07-28-2002, 07:54 AM

Pic of the bottom showing the ends of the copper wires, obviously it needs more lapping, ran out of time tonite.

Volenti · 07-28-2002, 07:57 AM

Flow testing the block, It gets just over 2000L/H, me very happy

hopefully I can get it lapped and ready to install tomorrow night.

Gnozo · 07-28-2002, 10:27 AM

Wow....that looks killer......please share some temps soon

07-26-2002, 11:24 PM	#3
#Rotor Cooling Savant Join Date: Feb 2002 Location: Dione, sector 4s1256 Posts: 852	enter the BIG GUNS>>>>>>>> those fittings can very easily be 1" in diameter.... __________________ There is no Spoon....

07-27-2002, 12:50 AM	#6
Volenti Cooling Savant Join Date: Jan 2002 Location: in a nice cool spot Posts: 427	bah messed up image __________________ feel free to icq/msn me, I'm always willing to toss around ideas.

07-27-2002, 01:58 AM	#8
Sanjuro Cooling Neophyte Join Date: Sep 2001 Location: Port Coquitlam, BC Posts: 74	Hello? hmale? kick this guy's ass with your Titanium Velocity! __________________ Nothing to call home about...

07-27-2002, 05:32 PM	#13
iceheart Cooling Savant Join Date: Mar 2001 Location: Yonder Posts: 318	That's SICK! __________________ "If the majority is smarter than you, does that make everyone else a geek, or does it make you retarded?" - pHaestus

07-28-2002, 01:57 AM	#15
FRAGN'STIEN Cooling Savant Join Date: May 2002 Location: Rathdrum, ID Posts: 380	Nice twister. It looks like we have a pepsi wannabe on our hands hehe __________________ This space for rent

07-27-2002, 12:30 AM	#5
[4M]Mustang Cooling Neophyte Join Date: Jul 2002 Location: MO Posts: 8	looking at that last pic I think I gotta pee.......

07-27-2002, 03:11 AM	#10
gone_fishin Cooling Savant Join Date: May 2002 Location: Da UP Posts: 517	OK Velenti, my curiosity is overflowing in a giant whirlpool How powerfull is that pump you have there?

07-27-2002, 12:35 PM	#12
airspirit Been /.'d... have you? Join Date: Jul 2002 Location: Moscow, ID Posts: 1,986	That is frickin' tight, man! All you need now is to hook that up to a 10' tall cooling tower (string it outside and scare the neighbors) and you'll be set. Heh ...

07-27-2002, 10:07 PM	#14
\|PuNiSh3R\| Foo's Been Banned Join Date: May 2002 Location: Pennsyltucky Posts: 255	That is wicked..

07-28-2002, 01:59 AM	#16
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	Quick hook it up to a water block. Oh sorry there aren't to many people besides me playing with blocks that have that size of fittings and mine are mostly 5/8 not 1 inch. still it would be cool to see if it affects your cooling any. I've got a 740gph pump comming to play with myself. __________________ www.water-cool.com

07-28-2002, 02:04 AM	#18
webmedic Cooling Savant Join Date: Dec 2001 Location: Cheney, Wa Posts: 367	It's called the via 2600. On some sites I see it listed at 740 and on another site it's listed at 950. Noot sure which is acurate but if I shoot low and it's better well so be it. I can get upto 1200gph pumps. but i was kind of looking at not getting any bigger than the ehiem 1250 in size and the 1200gph pump may be a little bigger. __________________ www.water-cool.com

07-28-2002, 10:27 AM	#25
Gnozo Cooling Savant Join Date: Apr 2002 Location: Denmark Posts: 105	Wow....that looks killer......please share some temps soon __________________ AMD XP1700+ @ JIUHB 12 x 202 Epox 8RDA+ Samsung PC2700 512mb Asus V8420 TI4200 Eheim 1048 - Maze1 - AirPlex EVO240 - Lian Li PC-61

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)