n00b help, block mounting?

[dannzig] · 12-10-2001, 09:20 AM

Have any of you guys plans on mounting systems that are using the 4 mounting holes around the socket ?

Until now i have been using a system similiar to the original dangerden system.
But as my new waterblock is on the heavy side i would rather use the mounting holes....

is thick plexi the way to go or you have other ideas ?

Kevin · 12-10-2001, 12:23 PM

It depends what kind of block. If you are using an older style waterblock, thick plexi will be fine to mount it to the outer holes. However, a lot of the new blocks just come w/ tabs built into them. So it all depends what kind of block you have. I've had experience w/ both, and they both work fine.
-Kevin

12-10-2001, 09:20 AM	#1
[dannzig] Cooling Savant Join Date: Dec 2001 Location: Sweden Posts: 98	n00b help, block mounting? Have any of you guys plans on mounting systems that are using the 4 mounting holes around the socket ? Until now i have been using a system similiar to the original dangerden system. But as my new waterblock is on the heavy side i would rather use the mounting holes.... is thick plexi the way to go or you have other ideas ? __________________ \|father of ebba - www.ebba.da.ru\| at7max/d700/256/80/ti4200

12-10-2001, 12:23 PM	#2
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	It depends what kind of block. If you are using an older style waterblock, thick plexi will be fine to mount it to the outer holes. However, a lot of the new blocks just come w/ tabs built into them. So it all depends what kind of block you have. I've had experience w/ both, and they both work fine. -Kevin __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)