Chemicals of OC'n and Cooling - Insulation

Joe · 03-24-2001, 10:26 PM

http://www.procooling.com/articles/h...ing_and_.shtml

Take a look, it will answer some questions that have been posted here a couple times

Kevin · 03-25-2001, 04:02 AM

Nice article. very interesting and for sure one of a kind!
-Kev

ck42 · 03-25-2001, 07:51 AM

Joe:

Just got finished reading through it.

That's exactly the type of 'to the point', concise, and easy to read information that SO many watercoolers out there need and are constantly looking for...I think even *I* may have axed you a few questions regarding materials in the past

I believe this will become an excellent piece of reference material!

Good job!

Joe · 03-25-2001, 12:32 PM

I am already working on the second one in the series - Coolant Chemicals.

After that it will be Cooling Materials, and parts

After that it will be Tools for the Job , etc...

I really see the need to get back to basics on some of this stuff, as its the real way to get people into this hobby.

Chill · 04-10-2001, 01:39 PM

Joe...that Plumbers Goop that you talked about. Can it be used in place of silicon to seal around the edges of the socket and to cover the inside of the socket as well as the back of the socket on the motherboard. Also some multicolored foam was mentioned and used to insulate a water box. Can this foam be used around the socket, and inside the socket. Will it mold if it is exposed to moisture. I have my Maze 2 waterblock ready to go and I am going to use a Bottled water cooler to chill the water.

p[ara]d0x · 04-10-2001, 02:57 PM

Looking forward to the second part... There have been lots of questions about coolant, water wetter, and esp. dye-lite.

n00b · 04-10-2001, 06:47 PM

I'm really looking forward to the articles on the basics. You're absolutely right when you say it's a way to get new people into the hobby.

Freakyfrank · 04-11-2001, 05:16 AM

nice art.

but some light in the anti-corrosion debates would be ok..

03-24-2001, 10:26 PM	#1
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Chemicals of OC'n and Cooling - Insulation http://www.procooling.com/articles/h...ing_and_.shtml Take a look, it will answer some questions that have been posted here a couple times __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

03-25-2001, 04:02 AM	#2
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	Nice article. very interesting and for sure one of a kind! -Kev __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

03-25-2001, 12:32 PM	#4
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	I am already working on the second one in the series - Coolant Chemicals. After that it will be Cooling Materials, and parts After that it will be Tools for the Job , etc... I really see the need to get back to basics on some of this stuff, as its the real way to get people into this hobby. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

04-10-2001, 02:57 PM	#6
p[ara]d0x Cooling Neophyte Join Date: Mar 2001 Location: MI Posts: 66	Looking forward to the second part... There have been lots of questions about coolant, water wetter, and esp. dye-lite. __________________ -=== :[ara]d0x:: ===- -= http://pd0x.ath.cx/ =-

04-11-2001, 05:16 AM	#8
Freakyfrank Cooling Savant Join Date: Nov 2000 Location: Eindhoven, Holland Posts: 238	nice art. but some light in the anti-corrosion debates would be ok.. __________________ OC'ing is my middlename

03-25-2001, 07:51 AM	#3
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Joe: Just got finished reading through it. That's exactly the type of 'to the point', concise, and easy to read information that SO many watercoolers out there need and are constantly looking for...I think even I may have axed you a few questions regarding materials in the past I believe this will become an excellent piece of reference material! Good job!

04-10-2001, 01:39 PM	#5
Chill Cooling Neophyte Join Date: Apr 2001 Location: British Columbia, Canada Posts: 10	Joe...that Plumbers Goop that you talked about. Can it be used in place of silicon to seal around the edges of the socket and to cover the inside of the socket as well as the back of the socket on the motherboard. Also some multicolored foam was mentioned and used to insulate a water box. Can this foam be used around the socket, and inside the socket. Will it mold if it is exposed to moisture. I have my Maze 2 waterblock ready to go and I am going to use a Bottled water cooler to chill the water.

04-10-2001, 06:47 PM	#7
n00b Cooling Neophyte Join Date: Apr 2001 Posts: 22	I'm really looking forward to the articles on the basics. You're absolutely right when you say it's a way to get new people into the hobby.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)