![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Sep 2001
Location: Davis, CA USA
Posts: 113
|
![]()
Hi all! I want to thank all of the people who helped answer my previous questions!
Okay, I just read Una's project and I wanted to know if there is any advantage to using Una's approach (1/2" tubes from res to pump and 3/8" tubes everywhere else) versus just the plain old 1/2" tubing for everything?
__________________
Pentium 4 3.06 GHz watercooled by Koolance EXOS Gigabyte 8INXP mobo 512MB Corsair PC3200 DDR RAM Fortron 400W PSU Watercooled Radeon 9700 Pro Quiet as a mouse! Koolance Temps: 26C/32C BIOS Temps: 36C/44C ========================== Dual Athlon MP 2000+ watercooled Black Ice Extreme, Eheim 1250 pump, 2 DTek TC-4 blocks, and homemade res Gigabyte GA-7DPWDX mobo 512 MB Registered Mushkin DDR 2100 RAM RAID 0: 2 IBM 60 GXP 60GB ea RAID 5: 3 Western Digital Caviar 60GB ea MSI GeForce4 4400 Sound Blaster Audigy MP3+ Yamaha CDRW-F1 Adaptec ATA RAID 2100 card LOADS OF FANS!!!! |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Apr 2000
Location: Bremerton, WA
Posts: 514
|
![]()
I didn't find any performance boost over having 3/8" everywhere. It's definately alot better to do 1/2" everywhere. The 1/2" from the reservior to the pump was just an experiemnt I tried, and it turned out to have no noticeable difference.
__________________
The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM! |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|