![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Jun 2001
Location: Desert City in California
Posts: 631
|
![]()
I am looking to buy this pump http://www.petwarehouse.com/webstore...c?OpenDocument
You see how this one has no intake attachment. I was wondering if you take that shroud off is there npt threads for me to attach a barb to? Is it M or F? What NPT size? Thanks again.
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg) |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Aug 2001
Location: Stockholm Sweden
Posts: 128
|
![]()
If you take a look at: www.eheim.com
you will notice that the pump is delivered with a hose connection on the suction side as well. You can unscrew the hoseconnectors and put a male 5/8" on the inlet or 3/8" on the outlet. However if you only unscrew the little lightgray nut/washer you can use female connectors instead. Eheim's homepage states 3/4" and 1/2" but that's the inner diameter of the hose and not the actual fitting inside the pump. Hope this answers your questions
__________________
If it ain't broke, fix it. Setup: Dual Duron 1100 | Voodoo 3 2000 | Addtronics W8500(WTX) | Eheim 1250 | Car radiator | 2 Innovatech WB | |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Aug 2001
Location: Stockholm Sweden
Posts: 128
|
![]()
I forgot to tell you that this pump rocks.
However the flow is so fast that a ordinary T-connector for removing airbubbels dosen't cut it. The flow is so fast that the bubbels in my system, before i made a tank, only went with the water and were so small that it made the water look like i had put milk in it. I've put a tank at the top of my system to let the water flow a little slower so that the small bubbels stand a chance at rising to the surface. Hope it works out ok for ya
__________________
If it ain't broke, fix it. Setup: Dual Duron 1100 | Voodoo 3 2000 | Addtronics W8500(WTX) | Eheim 1250 | Car radiator | 2 Innovatech WB | |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Jun 2001
Location: Desert City in California
Posts: 631
|
![]()
Thanks for the quick relpy.
I am planning on using a res in my system. How much heat does the pump add to the case? I am thinking of putting a fan at the bottom of the case near the pump to suck air out the case and heat away from the pump. One more question: Can you get down to the female threads on both inlet and outlet? Thanks
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg) |
![]() |
![]() |
![]() |
#5 |
Cooling Savant
Join Date: Aug 2001
Location: Stockholm Sweden
Posts: 128
|
![]()
The pump puts out 28W of heat abot 5W is converted to actual flow and the rest is heat in your system.
And yes you can unscrew the male connector and get access to the female connector. Hope it helps cus this reply was'n quite as swift as the first one.
__________________
If it ain't broke, fix it. Setup: Dual Duron 1100 | Voodoo 3 2000 | Addtronics W8500(WTX) | Eheim 1250 | Car radiator | 2 Innovatech WB | |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|