FS/FT : Complete Watercooling Kit

warpath · 09-21-2002, 05:47 PM

Included in this kit is everything above... listed below

Maze 2 waterblock w/ 1/2" barb fittings
Heatercore w/ 1/2" barb fittings
Modded Danner Magdrive model 250 (250GPH) (garunteed not to crack) (comes with custom cable and switch, also includes custom plug for the case
10' Braided Thickwall Vinyl 1/2" ID Tubing
Sunon 87CFM 120mm (3pin, adapter included)
Nidec betaV 90CFM 120mm (tailed or untailed, your choice)
2 120mm fan grills
3-pin to 4-pin molex adapter
aluminum dual compunurse bay cover w/ dual compunurse's
2 custom 1/2" barb fitting 1" internal bore ball valves
3M teflon sealant tape
10 "mounting" zip ties
6" 1/2" ID thickwall silicone tubing
6" 1/2" ID thickwall tygon tubing
1 5/8" barb-style t-fitting
2 1/2" 90 degree barb fittings
1 5/8" 90 degree barb fitting
7 1/2" copper pipe routers
2 1" copper pipe routers
Brass replacement fittings for pump (just in case you need them for something)
1 Tube radio shanty thermal grease
15 1/4" O-Rings for sealing fittings w/ tygon/silicone tubing
9 1/2" hose screw clamps

OPTION OF THE DAY

#1. you can choose either a custom built aluminum shroud
OR
#2. all the neccessary materials to build your own, which includes
- 4" holesaw
- 6' of aluminum flashing (enough for about 6 shrouds)
- rosin-core solder (enough for about 10 shrouds)

FREE ITEM OF THE DAY

Custom Taisol CGK - Cut perfectly for all Geforce3 Ti200's, will fit most any video card (radeon 64, radeon 8500, geforce 4mx, geforce 4 ti4200)!

Your choice, whole kit, including either option #1 or #2 - $150 + shipping

SPECIAL OF THE DAY

Both options (#1 AND #2) for $165 + shipping, length of aluminum flashing WILL NOT BE REDUCED

ALSO LOOKING FOR TRADES...
Cpu's
Motherboard's
Ram
Large Hard drives (40G+)

09-21-2002, 05:47 PM	#1
warpath Cooling Neophyte Join Date: Nov 2001 Location: Tucson AZ Posts: 28	FS/FT : Complete Watercooling Kit Included in this kit is everything above... listed below Maze 2 waterblock w/ 1/2" barb fittings Heatercore w/ 1/2" barb fittings Modded Danner Magdrive model 250 (250GPH) (garunteed not to crack) (comes with custom cable and switch, also includes custom plug for the case 10' Braided Thickwall Vinyl 1/2" ID Tubing Sunon 87CFM 120mm (3pin, adapter included) Nidec betaV 90CFM 120mm (tailed or untailed, your choice) 2 120mm fan grills 3-pin to 4-pin molex adapter aluminum dual compunurse bay cover w/ dual compunurse's 2 custom 1/2" barb fitting 1" internal bore ball valves 3M teflon sealant tape 10 "mounting" zip ties 6" 1/2" ID thickwall silicone tubing 6" 1/2" ID thickwall tygon tubing 1 5/8" barb-style t-fitting 2 1/2" 90 degree barb fittings 1 5/8" 90 degree barb fitting 7 1/2" copper pipe routers 2 1" copper pipe routers Brass replacement fittings for pump (just in case you need them for something) 1 Tube radio shanty thermal grease 15 1/4" O-Rings for sealing fittings w/ tygon/silicone tubing 9 1/2" hose screw clamps OPTION OF THE DAY #1. you can choose either a custom built aluminum shroud OR #2. all the neccessary materials to build your own, which includes - 4" holesaw - 6' of aluminum flashing (enough for about 6 shrouds) - rosin-core solder (enough for about 10 shrouds) FREE ITEM OF THE DAY Custom Taisol CGK - Cut perfectly for all Geforce3 Ti200's, will fit most any video card (radeon 64, radeon 8500, geforce 4mx, geforce 4 ti4200)! Your choice, whole kit, including either option #1 or #2 - $150 + shipping SPECIAL OF THE DAY Both options (#1 AND #2) for $165 + shipping, length of aluminum flashing WILL NOT BE REDUCED ALSO LOOKING FOR TRADES... Cpu's Motherboard's Ram Large Hard drives (40G+)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)