adequate radiator?

bdunosk · 08-31-2001, 07:49 PM

Let's say I never want to cool with a peltier, but I do want to overclock. Are those 4x4 radiators (Hayden something-or-other) adequate, or is a heater core really necessary?

Thanks!

Fuse · 08-31-2001, 09:19 PM

If you mean those small ones like the tranny kinda ones then maybe, it will not suffice much of an over-clock at all because of its design.( not sure the specific flaws, im no engineer or anything, but its design/materials cause it to decrease in performence.)If you want to get a really good OC and still get low temps then you should go with the Big Mamma from caseetc or the aquacoil.

redleader · 09-01-2001, 01:20 AM

They are pretty good for modest load, but a massively overclocked Athlon might give one trouble. To be honest I'm not sure how they perform, but I'd assume they have a fraction of the heat drop of a Big Mama. I'd try and get something a little larger (even if you don't need that kind of performance, a better radiator means a quieter radiator fan). Also AFAIK they are usally Aluminium, which is not recommended in a system which contains copper (nearly all waterblocks are copper).

08-31-2001, 07:49 PM	#1
bdunosk Cooling Neophyte Join Date: May 2001 Location: Cincinnati, OH Posts: 93	adequate radiator? Let's say I never want to cool with a peltier, but I do want to overclock. Are those 4x4 radiators (Hayden something-or-other) adequate, or is a heater core really necessary? Thanks!

08-31-2001, 09:19 PM	#2
Fuse Cooling Neophyte Join Date: Aug 2001 Posts: 2	If you mean those small ones like the tranny kinda ones then maybe, it will not suffice much of an over-clock at all because of its design.( not sure the specific flaws, im no engineer or anything, but its design/materials cause it to decrease in performence.)If you want to get a really good OC and still get low temps then you should go with the Big Mamma from caseetc or the aquacoil.

09-01-2001, 01:20 AM	#3
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	They are pretty good for modest load, but a massively overclocked Athlon might give one trouble. To be honest I'm not sure how they perform, but I'd assume they have a fraction of the heat drop of a Big Mama. I'd try and get something a little larger (even if you don't need that kind of performance, a better radiator means a quieter radiator fan). Also AFAIK they are usally Aluminium, which is not recommended in a system which contains copper (nearly all waterblocks are copper).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)