New pump time...need advise - Page 2

jtroutma · 10-21-2002, 03:16 PM

Picked it up Friday....have yet to evven plug it in. Ordered a batch of Tygon tubing from BECooling and hopefully it will be in around Wednesday.

I figure that if the Rio lasts until I can get all my parts in, then I will just do a massive overhaul to my entire case in one day instead of 3 separate "minor" fixes.

Strange though.... the only thing that will be the same in my watercooling loop will be the waterblock (Dtek TC-4 - Dang good waterblock at that!). However, I have a feeling that after I install the Sedra, I will NEED to remove the turbulators and replace them with the springs that DodgeViper has been experimenting with

OH well.... Can't say that I can complain right now about my current setup.... Athlon XP 1800+ @ 1748Mhz (152 X 11.5) w/ default Vcore and only at 32C. Sheesh! Too bad my old T-bird at the SAME exact settings was always hovering around 40-42C

10-21-2002, 03:16 PM	#26
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	Picked it up Friday....have yet to evven plug it in. Ordered a batch of Tygon tubing from BECooling and hopefully it will be in around Wednesday. I figure that if the Rio lasts until I can get all my parts in, then I will just do a massive overhaul to my entire case in one day instead of 3 separate "minor" fixes. Strange though.... the only thing that will be the same in my watercooling loop will be the waterblock (Dtek TC-4 - Dang good waterblock at that!). However, I have a feeling that after I install the Sedra, I will NEED to remove the turbulators and replace them with the springs that DodgeViper has been experimenting with OH well.... Can't say that I can complain right now about my current setup.... Athlon XP 1800+ @ 1748Mhz (152 X 11.5) w/ default Vcore and only at 32C. Sheesh! Too bad my old T-bird at the SAME exact settings was always hovering around 40-42C __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)