new macrochannel block

sn_85 · 04-13-2003, 11:53 PM

http://becooling.safeshopper.com/6/191.htm?499

SlitEdge eh? sounds kinda funny but if at $55 it can perform like a $90 WW then i'd be okay. oo and look at those lofty claims, dont start the same nemesis/evolution thread over again tho

at least they say one of the best. i trust becooling though.

koslov · 04-14-2003, 12:09 AM

Microchannels? No, those aren't even mini... MACROchannels is more like it. Looks like it might work well for a 40x40 pelt. But without any flow directors, I have to doubt the outer channels are getting much flow.

sn_85 · 04-14-2003, 12:13 AM

yeah, wheres the impinging jet and center barb. dont really state the base thickness though. although they do say WIDE micro channels.

shroomer · 04-14-2003, 03:27 AM

If it were cheaper I might look into it, but that's too pricy for what it is.

Balinju · 04-14-2003, 07:14 AM

It's far far away from ww. i can see no impingement in that block, anyone can point it out for me please??

if the water is going to enter from one side and travel to the other side, without any impingement, i don't know what kind of performance that block can give you. No turbulance and no high speed water, how is heat going to be collected with a fast rate??

koslov · 04-14-2003, 09:59 PM

Technically, it is not saying it is better than WW. It is only saying it is one of the best performing blocks on the market. As of right now, WW is not available.

shroomer · 04-26-2003, 12:33 PM

Also... When Cathar did a test without the center barb it performed just a few C worse than with. I'll take a few C hit if I can have just 2 barbs!

ChrioN · 04-26-2003, 01:09 PM

Did Cathars jetnossle do any difference in temps?

Cyco-Dude · 04-26-2003, 02:41 PM

Quote:

Originally posted by koslov
Technically, it is not saying it is better than WW. It is only saying it is one of the best performing blocks on the market. As of right now, WW is not available.

what exactly is 'WW'? some sort of new waterblock?? the only 'ww' im aware of is water wetter lol. sar if i sound dumb but ive been outta the loop for awhile

8-Ball · 04-26-2003, 03:01 PM

BillA's White Water review

Check out those C/W values. It is, quite simply THE best waterblock on the market, though availability has always been an issue due to it being handmade.

8-ball

Cyco-Dude · 04-26-2003, 05:47 PM

lol, im sure fiXXXXXit knows all about that

thx 4 the linkage....

shroomer · 04-26-2003, 06:06 PM

Of course the jet nosel made a difference, but not as much as people are thinking. There is a lot more than just impingement going on in there. Anyway, Morphling1's block looks as close to perfect as I've seen yet. I hope he can get those things mass produced soon. I'm going to be buying in the next couple of months.

Cathar · 04-26-2003, 09:02 PM

The impingement nozzle on the White Water makes about a 3C difference on a hot CPU over a side-to-side action.

The White Water will be mass-produced very, very soon. It's going though the final stages of market preparation as we speak. It will be available at quite a significant price reduction over the hand-made items that I made, and it will be manufactured by a major USA-based waterblock maker.

Rayman2k2 · 04-26-2003, 09:50 PM

Quote:

Originally posted by Cathar
The impingement nozzle on the White Water makes about a 3C difference on a hot CPU over a side-to-side action.

The White Water will be mass-produced very, very soon. It's going though the final stages of market preparation as we speak. It will be available at quite a significant price reduction over the hand-made items that I made, and it will be manufactured by a major USA-based waterblock maker.

will you still make profit though? and, will they be lapped to the degree that I hear you lap the blocks to?

04-13-2003, 11:53 PM	#1
sn_85 Cooling Savant Join Date: Mar 2003 Location: H-town, TX Posts: 122	new macrochannel block http://becooling.safeshopper.com/6/191.htm?499 SlitEdge eh? sounds kinda funny but if at $55 it can perform like a $90 WW then i'd be okay. oo and look at those lofty claims, dont start the same nemesis/evolution thread over again tho at least they say one of the best. i trust becooling though. Last edited by sn_85; 04-14-2003 at 12:11 AM.

04-14-2003, 07:14 AM	#5
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	It's far far away from ww. i can see no impingement in that block, anyone can point it out for me please?? if the water is going to enter from one side and travel to the other side, without any impingement, i don't know what kind of performance that block can give you. No turbulance and no high speed water, how is heat going to be collected with a fast rate?? __________________ So the bullet proof vest aint a $hit when d laser is pointed to your head Kid

04-26-2003, 03:01 PM	#10
8-Ball Cooling Savant Join Date: Feb 2002 Location: Oxford University, UK Posts: 452	BillA's White Water review Check out those C/W values. It is, quite simply THE best waterblock on the market, though availability has always been an issue due to it being handmade. 8-ball __________________ For those who believe that water needs to travel slowly through the radiator for optimum performance, read the following thread. READ ALL OF THIS!!!!

04-14-2003, 12:09 AM	#2
koslov Cooling Savant Join Date: Jul 2002 Location: Posts: 264	Microchannels? No, those aren't even mini... MACROchannels is more like it. Looks like it might work well for a 40x40 pelt. But without any flow directors, I have to doubt the outer channels are getting much flow.

04-14-2003, 12:13 AM	#3
sn_85 Cooling Savant Join Date: Mar 2003 Location: H-town, TX Posts: 122	yeah, wheres the impinging jet and center barb. dont really state the base thickness though. although they do say WIDE micro channels.

04-14-2003, 03:27 AM	#4
shroomer Cooling Neophyte Join Date: Nov 2001 Location: Ohio Posts: 15	If it were cheaper I might look into it, but that's too pricy for what it is.

04-14-2003, 09:59 PM	#6
koslov Cooling Savant Join Date: Jul 2002 Location: Posts: 264	Technically, it is not saying it is better than WW. It is only saying it is one of the best performing blocks on the market. As of right now, WW is not available.

04-26-2003, 12:33 PM	#7
shroomer Cooling Neophyte Join Date: Nov 2001 Location: Ohio Posts: 15	Also... When Cathar did a test without the center barb it performed just a few C worse than with. I'll take a few C hit if I can have just 2 barbs!

04-26-2003, 01:09 PM	#8
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	Did Cathars jetnossle do any difference in temps?

04-26-2003, 05:47 PM	#11
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	lol, im sure fiXXXXXit knows all about that thx 4 the linkage....

04-26-2003, 06:06 PM	#12
shroomer Cooling Neophyte Join Date: Nov 2001 Location: Ohio Posts: 15	Of course the jet nosel made a difference, but not as much as people are thinking. There is a lot more than just impingement going on in there. Anyway, Morphling1's block looks as close to perfect as I've seen yet. I hope he can get those things mass produced soon. I'm going to be buying in the next couple of months.

04-26-2003, 09:02 PM	#13
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	The impingement nozzle on the White Water makes about a 3C difference on a hot CPU over a side-to-side action. The White Water will be mass-produced very, very soon. It's going though the final stages of market preparation as we speak. It will be available at quite a significant price reduction over the hand-made items that I made, and it will be manufactured by a major USA-based waterblock maker.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)