Check out my Yeong Yang cube! (pics link)

scopEDog · 04-30-2002, 11:12 AM

Hey guys...this is my first attempt at watercooling...what do you guys think??:

http://photos.yahoo.com/bc/scopedog2...tos.yahoo.com/

Comments welcome

WebMasta33 · 04-30-2002, 02:30 PM

Very nice. I'm just surprised you didn't put your BiX inside the case.

The water pipe adds a nice touch

As well as the 4.5" LCD screen... (4.5"? or 5?)

scopEDog · 04-30-2002, 03:13 PM

Heh thanks

For me it doesn't make sense putting a BiX in a hot case when your trying to cool it down. Or i could be totally wrong

...yeah its a 5 inch LCD

WebMasta33 · 04-30-2002, 05:43 PM

One "clean up mod" you could do, is cut out all the 5 1/4" bay plates, and make a border around your LCD to cover up all the PCB that's exposed.

scopEDog · 04-30-2002, 06:48 PM

The case came with plastic drive bay covers..i made a cutout from 2 of them but it didn't come out so good. I'm gonna try something else, maybe get alu covers and cut/paint them

Brad · 05-01-2002, 02:54 AM

nice work, love the lcd! is it just connected to a pci vid card?

scopEDog · 05-01-2002, 07:44 AM

Yeah i have a second vid card, gf2 pci..used mainly to display winamp plugins full screen, you know eye candy

Petmonster · 08-14-2002, 12:52 AM

Looks great! First time here and it's great to find a location where so many people are YY fans! I thought I was the only one, well, at least here in Washington.

I've done a few mod's to mine....take a look.

http://www.pro-pcs.com/gallery/gallery_2.htm

phantazm03 · 09-05-2002, 09:35 PM

the link doens't work scopEDog.... i'd like to see your case.

troy.

scopEDog · 09-05-2002, 09:56 PM

Sorry about that...just organized things a bit different...http://photos.yahoo.com/scopedog23/

vegetto714 · 06-11-2003, 12:16 AM

Question for all YY case owners. If someone would be so kind as to measure the width of the motherboard chamber, I would be ever so thankful. I want to use a YY case for H2O cooling, but I dont know If my 6 inch wide D-Tek heatercore will fit in front where the intake fan is.

Amfibius · 06-13-2003, 12:06 PM

Great job, scopedog! Where did you get your LCD's from?

04-30-2002, 11:12 AM	#1
scopEDog Cooling Neophyte Join Date: Apr 2002 Posts: 49	Check out my Yeong Yang cube! (pics link) Hey guys...this is my first attempt at watercooling...what do you guys think??: http://photos.yahoo.com/bc/scopedog2...tos.yahoo.com/ Comments welcome

04-30-2002, 02:30 PM	#2
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	Very nice. I'm just surprised you didn't put your BiX inside the case. The water pipe adds a nice touch As well as the 4.5" LCD screen... (4.5"? or 5?) __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

04-30-2002, 05:43 PM	#4
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	One "clean up mod" you could do, is cut out all the 5 1/4" bay plates, and make a border around your LCD to cover up all the PCB that's exposed. __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

05-01-2002, 02:54 AM	#6
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	nice work, love the lcd! is it just connected to a pci vid card? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

08-14-2002, 12:52 AM	#8
Petmonster Cooling Neophyte Join Date: Aug 2002 Location: Washington State Posts: 1	Looks great! First time here and it's great to find a location where so many people are YY fans! I thought I was the only one, well, at least here in Washington. I've done a few mod's to mine....take a look. http://www.pro-pcs.com/gallery/gallery_2.htm __________________ Petmonster

04-30-2002, 03:13 PM	#3
scopEDog Cooling Neophyte Join Date: Apr 2002 Posts: 49	Heh thanks For me it doesn't make sense putting a BiX in a hot case when your trying to cool it down. Or i could be totally wrong ...yeah its a 5 inch LCD

04-30-2002, 06:48 PM	#5
scopEDog Cooling Neophyte Join Date: Apr 2002 Posts: 49	The case came with plastic drive bay covers..i made a cutout from 2 of them but it didn't come out so good. I'm gonna try something else, maybe get alu covers and cut/paint them

05-01-2002, 07:44 AM	#7
scopEDog Cooling Neophyte Join Date: Apr 2002 Posts: 49	Yeah i have a second vid card, gf2 pci..used mainly to display winamp plugins full screen, you know eye candy

09-05-2002, 09:35 PM	#9
phantazm03 Cooling Neophyte Join Date: Sep 2002 Location: Ottawa/Ontario/Canada Posts: 15	the link doens't work scopEDog.... i'd like to see your case. troy.

09-05-2002, 09:56 PM	#10
scopEDog Cooling Neophyte Join Date: Apr 2002 Posts: 49	Sorry about that...just organized things a bit different...http://photos.yahoo.com/scopedog23/

06-11-2003, 12:16 AM	#11
vegetto714 Cooling Neophyte Join Date: Jun 2003 Location: MI Posts: 10	Question for all YY case owners. If someone would be so kind as to measure the width of the motherboard chamber, I would be ever so thankful. I want to use a YY case for H2O cooling, but I dont know If my 6 inch wide D-Tek heatercore will fit in front where the intake fan is.

06-13-2003, 12:06 PM	#12
Amfibius Cooling Neophyte Join Date: May 2003 Location: Perth, Western Australia Posts: 2	Great job, scopedog! Where did you get your LCD's from? __________________ Vidi, vici, veni (I saw, I conquired, I came)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)