Good case for two radiators

RickCain · 06-17-2003, 11:35 PM

Anyone have suggestions for a case which can house a Det Pro Core and a BIX? I would like to get a GPU block and run it on it's own loop through the BIX and keep the CPU and NB on the Pro Core.

I'd perfer the Pro Core in the front (bottom) and the BIX in the rear or top.

Any suggestions?

sn_85 · 06-18-2003, 01:09 AM

i'd get the CPU block on the DTeK pro core and the GPU and NB on the BIX b/c they dont put out as much heat as the CPU.

mad mikee · 06-18-2003, 10:06 AM

BO(V)BZ · 06-18-2003, 11:16 AM

In terms of cases, you couldn't go wrong with a Lian Li full tower, like the PC70, or the one that is all black and has the front cover [I don't know the model number, and I own one ! ] You should have lots of room to put in two radiators that size into one of those beasts.

BO(V)BZ

Crosstrack16 · 06-18-2003, 02:20 PM

I hear a Cheiftec/Antec/Enermax full tower is pretty roomy and only about 60$. Might be worth looking into...

mikoto · 06-18-2003, 02:35 PM

http://www.directron.com/ma01bd.html

Dimension: 470 x 205 x 670mm(DxWxH) (height including the feet), 18.49" x 8.07" x 26.36".

Tough to find a much bigger case, especially for the money. Plenty of room above PSU.

redleader · 06-18-2003, 02:40 PM

I have that case. Really nice. You can do a double heatercore across the top, another double in the front or have a single core above the power supply.

Crosstrack16 · 06-18-2003, 04:03 PM

Thats the one i had in mind...

Brad · 06-19-2003, 03:07 AM

www.servercase.com

06-17-2003, 11:35 PM	#1
RickCain Cooling Savant Join Date: Feb 2002 Posts: 110	Good case for two radiators Anyone have suggestions for a case which can house a Det Pro Core and a BIX? I would like to get a GPU block and run it on it's own loop through the BIX and keep the CPU and NB on the Pro Core. I'd perfer the Pro Core in the front (bottom) and the BIX in the rear or top. Any suggestions?

06-18-2003, 10:06 AM	#3
mad mikee Cooling Savant Join Date: Oct 2001 Location: US of A!!!! Posts: 146	Yeah was sn_85 said!!!! __________________ His PCV2000 DFI ULTRA D (SLI Modded just because) 4200 x2 @ ~ 10 x 260 /1.49 Vcore , G5 + PA160 + 150mm Papst@5V + Maze 4 GPU + mcp350. Temp 36-37(load-2 x D20L) 2x1GB Ballistix PC4000, x800xl 256m, 74G rap + 160G Hitachi SATA , 21" mit/nec 1920x1440 Crt + 19 Neovo F-419 1280x1024 LCD, OCZ Powerstream 600 Hers: (my beloved who lets me do all this) LianLi PCV1000, SD3700 @ 9x300, 1GB GBLA, 250+ 120 SATA, X700pro, 19" Neovo F-419 LCD, another OCZ 600

06-19-2003, 03:07 AM	#9
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	www.servercase.com __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

06-18-2003, 01:09 AM	#2
sn_85 Cooling Savant Join Date: Mar 2003 Location: H-town, TX Posts: 122	i'd get the CPU block on the DTeK pro core and the GPU and NB on the BIX b/c they dont put out as much heat as the CPU.

06-18-2003, 11:16 AM	#4
BO(V)BZ Cooling Neophyte Join Date: Apr 2003 Location: WI Posts: 53	In terms of cases, you couldn't go wrong with a Lian Li full tower, like the PC70, or the one that is all black and has the front cover [I don't know the model number, and I own one ! ] You should have lots of room to put in two radiators that size into one of those beasts. BO(V)BZ

06-18-2003, 02:20 PM	#5
Crosstrack16 Cooling Savant Join Date: Jun 2001 Location: Spring Hill, FL Posts: 169	I hear a Cheiftec/Antec/Enermax full tower is pretty roomy and only about 60$. Might be worth looking into...

06-18-2003, 02:35 PM	#6
mikoto Cooling Neophyte Join Date: Nov 2002 Location: smog Posts: 47	http://www.directron.com/ma01bd.html Dimension: 470 x 205 x 670mm(DxWxH) (height including the feet), 18.49" x 8.07" x 26.36". Tough to find a much bigger case, especially for the money. Plenty of room above PSU.

06-18-2003, 02:40 PM	#7
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	I have that case. Really nice. You can do a double heatercore across the top, another double in the front or have a single core above the power supply.

06-18-2003, 04:03 PM	#8
Crosstrack16 Cooling Savant Join Date: Jun 2001 Location: Spring Hill, FL Posts: 169	Thats the one i had in mind...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)