Check out LiquidCool.Org

LiquidCool · 05-12-2001, 06:33 AM

Yeah it's a shameless plug, but I wanted to test my new sig!

LiquidCool · 05-12-2001, 07:02 AM

come ON! go buy sumthin (testing again)

Joe · 05-12-2001, 07:08 AM

god thats sad

I am waiting till you are offering free BJ's for visiting.

Stitched2Gether · 05-12-2001, 10:05 AM

Quote:

Originally posted by Joe:
god thats sad

I am waiting till you are offering free BJ's for visiting.

Maybe some kind of a coupon deal at least.

ck42 · 05-12-2001, 11:16 AM

Ok...shameless plug assist mode /ON

I just ordered fittings for my soon-to-be system. For all you who *want* to use 1/2" ID hosing, these fittings will allow you to keep your 3/8" ID tubing and still reap pretty much all the benefits of the 1/2" stuff.

The one remaining part of my system which won't give me the 100% equivalent of 1/2" ID tubing is my barb fittings on my BigMamas...I'd have to replace those.

So, for all you out there with wimpy pumps

, get rid of those restrictive fittings and allow your pump some room to breath...err, flow....or whatever.

Shamless plug assist mode /OFF

LiquidCool · 05-12-2001, 07:02 PM

I really was just trying my new sig!

But CK is right, they are good shit :P

Memphis · 05-13-2001, 04:45 PM

Oh man, when I get together the cash to purchase a cross-drilled waterblock you know where I'm going!

[/sarcasm off]

I hope you are not going to try the same shit you pulled on OCAU forums Michael.

Cheers

Memphis

LiquidCool · 05-13-2001, 05:52 PM

Pull what shit?
heh, I dont remember they pulled those forums down...

I REALLY WAS TRYING MY FREAKIN SIG!

Kodiak · 05-13-2001, 06:02 PM

Alright children...

LiquidCool · 05-13-2001, 06:34 PM

He started it, he thinks crossdrilled blocks suck just because they are crossdrilled, if he would study a little he would see there is no difference. It's just built a different way... moron.. anyway...

Memphis · 05-13-2001, 10:45 PM

Ahh, poor Michael...

Dude, you are trying to sell something. When you get some negative shit it doesn't really pay to bag people. Regardless of them being pricks

Take it on the chin.

If my memory serves me correctly, I made an observation of your site concerning your water-cooling data. This occured two months ago. Surely you could have learnt to use Excel reasonably well in that time frame? From a scientific viewpoint, raw data tells the reader absolutely nothing. Its a waste of a readers time to draw conclusions. Thats your job - to analyse the data. The best way to analyse the data is to put it in a graph. Simple.

Secondly. You have made a very valid point concerning how good a cross-drilled water block is compared to a milled channel one. Yet, I do not see a comparison of your 'Big Bore' against a Danger Den II. So we, the users and potential customers must take your claims as gospel along with your raw data and believe its proof???

I think you need to do some more work on your product, especially the presentation. Do some testing and present it properly. Instead of sitting on your high horse backing a half baked product how about you make if a full baked one?

Do this before you go and bag other manufacturers too! That was what I was alluding to previously.

Edit: Try reading through your site as a potential customer who has come across it through a search. In particular the negative feedback news page. What you consider clever and witty can and is seen very differently. If you want to appear professional then act professionally!

Cheers

Memphis

iceheart · 05-14-2001, 04:22 AM

I suggest a third-party (procooling?) test of the bigbore vs the DD maze 2, that should solve all your problems.

LiquidCool · 05-14-2001, 11:58 AM

The only thing that agrravated me was that you said on the OCA forums that crossdrilled blocks were inferior. I simply disagreed. I have seen what attempts were made in the past few years with crossdrilled blocks and I can see why you would say that.

Also, I am not advertising it as a sellable product. As I am not currently selling them.

As soon as I can I will be making more and sending them to other sites to be tested, including procooling...

And for the last time I was just trying to test my sig!

imagex · 05-18-2001, 06:55 PM

hell i liked the news flash,shows your real. and it's your site.

and my cross drill block beats them all,i just don't have time to make and sell it.

05-12-2001, 06:33 AM	#1
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	Check out LiquidCool.Org Yeah it's a shameless plug, but I wanted to test my new sig!

05-12-2001, 07:08 AM	#3
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	god thats sad I am waiting till you are offering free BJ's for visiting. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

05-13-2001, 04:45 PM	#7
Memphis Cooling Neophyte Join Date: Dec 2000 Location: Melbourne, Victoria, Australia Posts: 45	Oh man, when I get together the cash to purchase a cross-drilled waterblock you know where I'm going! [/sarcasm off] I hope you are not going to try the same shit you pulled on OCAU forums Michael. Cheers Memphis __________________ My first computer:http://www.overclockers.com.au/pcdb/...phis&page=pics My second computer: 1.2 GHz AXIA, MSI K7T Turbo LE, 256 MB Kingmax PC150 RAM Gigabyte 32 MB GeForce IIMX, 10/100 NIC, Quantum 40GB 7200rpm ATA100 HDD KDS 19", Creative 12x DVD, CD Writer, Dual boot Win98 SE/Linux Red Hat 7.1 Email me: atrewin@hotmail.com

05-13-2001, 06:02 PM	#9
Kodiak Cooling Neophyte Join Date: Oct 2000 Location: New Zealand Posts: 18	Alright children... __________________ Mark "Kodiak" Wylie hardware guru, SGI promoter + über geek

05-13-2001, 10:45 PM	#11
Memphis Cooling Neophyte Join Date: Dec 2000 Location: Melbourne, Victoria, Australia Posts: 45	Ahh, poor Michael... Dude, you are trying to sell something. When you get some negative shit it doesn't really pay to bag people. Regardless of them being pricks Take it on the chin. If my memory serves me correctly, I made an observation of your site concerning your water-cooling data. This occured two months ago. Surely you could have learnt to use Excel reasonably well in that time frame? From a scientific viewpoint, raw data tells the reader absolutely nothing. Its a waste of a readers time to draw conclusions. Thats your job - to analyse the data. The best way to analyse the data is to put it in a graph. Simple. Secondly. You have made a very valid point concerning how good a cross-drilled water block is compared to a milled channel one. Yet, I do not see a comparison of your 'Big Bore' against a Danger Den II. So we, the users and potential customers must take your claims as gospel along with your raw data and believe its proof??? I think you need to do some more work on your product, especially the presentation. Do some testing and present it properly. Instead of sitting on your high horse backing a half baked product how about you make if a full baked one? Do this before you go and bag other manufacturers too! That was what I was alluding to previously. Edit: Try reading through your site as a potential customer who has come across it through a search. In particular the negative feedback news page. What you consider clever and witty can and is seen very differently. If you want to appear professional then act professionally! Cheers Memphis __________________ My first computer:http://www.overclockers.com.au/pcdb/...phis&page=pics My second computer: 1.2 GHz AXIA, MSI K7T Turbo LE, 256 MB Kingmax PC150 RAM Gigabyte 32 MB GeForce IIMX, 10/100 NIC, Quantum 40GB 7200rpm ATA100 HDD KDS 19", Creative 12x DVD, CD Writer, Dual boot Win98 SE/Linux Red Hat 7.1 Email me: atrewin@hotmail.com

05-12-2001, 07:02 AM	#2
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	come ON! go buy sumthin (testing again)

05-12-2001, 11:16 AM	#5
ck42 Cooling Savant Join Date: Dec 2000 Location: Atlanta Posts: 154	Ok...shameless plug assist mode /ON I just ordered fittings for my soon-to-be system. For all you who want to use 1/2" ID hosing, these fittings will allow you to keep your 3/8" ID tubing and still reap pretty much all the benefits of the 1/2" stuff. The one remaining part of my system which won't give me the 100% equivalent of 1/2" ID tubing is my barb fittings on my BigMamas...I'd have to replace those. So, for all you out there with wimpy pumps , get rid of those restrictive fittings and allow your pump some room to breath...err, flow....or whatever. Shamless plug assist mode /OFF

05-12-2001, 07:02 PM	#6
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	I really was just trying my new sig! But CK is right, they are good shit :P

05-13-2001, 05:52 PM	#8
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	Pull what shit? heh, I dont remember they pulled those forums down... I REALLY WAS TRYING MY FREAKIN SIG!

05-13-2001, 06:34 PM	#10
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	He started it, he thinks crossdrilled blocks suck just because they are crossdrilled, if he would study a little he would see there is no difference. It's just built a different way... moron.. anyway...

05-14-2001, 04:22 AM	#12
iceheart Cooling Savant Join Date: Mar 2001 Location: Yonder Posts: 318	I suggest a third-party (procooling?) test of the bigbore vs the DD maze 2, that should solve all your problems. __________________ "If the majority is smarter than you, does that make everyone else a geek, or does it make you retarded?" - pHaestus

05-14-2001, 11:58 AM	#13
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	The only thing that agrravated me was that you said on the OCA forums that crossdrilled blocks were inferior. I simply disagreed. I have seen what attempts were made in the past few years with crossdrilled blocks and I can see why you would say that. Also, I am not advertising it as a sellable product. As I am not currently selling them. As soon as I can I will be making more and sending them to other sites to be tested, including procooling... And for the last time I was just trying to test my sig!

05-18-2001, 06:55 PM	#14
imagex Cooling Savant Join Date: Mar 2001 Location: south FL Posts: 220	hell i liked the news flash,shows your real. and it's your site. and my cross drill block beats them all,i just don't have time to make and sell it. __________________ Overkill'n Overclock'n Hybrid Mobile Solutions

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)