Mounting Duel Rad

NiKnight · 07-18-2003, 05:22 PM

I have 2 large rads that im having some probs mounting. This is my case,

Now the only place i can find, that will take the larger rad is the front bottom. but that would leave out a place for the 2nd rad. Any ideas of where to mount them?

bigben2k · 07-18-2003, 05:36 PM

I've got a similar shaped case (Chieftec Dragon DA-01) and I opted to put the PSU in two 5 1/4" drive bays, and mount a large 6" by 8" by 2" thick core, in the back. All you have to do, is remove that plate.

Alternatively, you could cut out the bottom,and rig up a bottom rad.

My $0.02

Pritorian · 07-18-2003, 05:59 PM

Or take dual output on the top of your case.

Cold air inn hot air out.

my, 0.00001euro

Boli · 07-18-2003, 09:29 PM

I have that almost exact same case (though older and some what worse for wear.) (one of my many)

Best place for it is in the 5 1/4" bays... that or sideways at the top on the side.

07-18-2003, 05:22 PM	#1
NiKnight Cooling Neophyte Join Date: Jul 2003 Location: tokyo Posts: 30	Mounting Duel Rad I have 2 large rads that im having some probs mounting. This is my case, Now the only place i can find, that will take the larger rad is the front bottom. but that would leave out a place for the 2nd rad. Any ideas of where to mount them?

07-18-2003, 05:36 PM	#2
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	I've got a similar shaped case (Chieftec Dragon DA-01) and I opted to put the PSU in two 5 1/4" drive bays, and mount a large 6" by 8" by 2" thick core, in the back. All you have to do, is remove that plate. Alternatively, you could cut out the bottom,and rig up a bottom rad. My $0.02 __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

07-18-2003, 05:59 PM	#3
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Or take dual output on the top of your case. Cold air inn hot air out. my, 0.00001euro __________________ Boo!

07-18-2003, 09:29 PM	#4
Boli Cooling Savant Join Date: Apr 2003 Location: Blackburn / Dundee Posts: 451	I have that almost exact same case (though older and some what worse for wear.) (one of my many) Best place for it is in the 5 1/4" bays... that or sideways at the top on the side.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)