what are average temps.

[kozoman]

i have a few questions.

here is the system.
abit kt7 raid in striping mode.
t-bird 1333.
110watt peltier
custom copper block.
now the cpu. is at 50 farenheit
with the water @ 80

it wont over clock . beyond 1400 mhz.

the board only goes up to 12.5 . in the multiplyer

also. running . winblows me.,
with 512 megs ram. micron crucial.133.

thanks for any help. was hoping to get the mighty 1.6 gig. out of all this . trouble with the liquid cooling...[

[kozoman]

the 50 farenheit, is at an idle.
now if i game. say fire up some counter strike. the temps goto 110 to 115 far.

again , thanks for any help.

[Joe]

Ohh this is an easy one.. you are overloading the pelt. the CPU you are using will generate over that pelts capacity to cool when it gets under a load.

get a 156watt or 172 watt and you will be good to go, also work on a new radiator cause your water temps may be a lil high.

also with that crucial ram you can go 145 CL2 with 4way interleave and turbo settings. ( atleast I am able to with my 256mb CL2 133 Crucial sticks, if not 150)