![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Apr 2002
Location: Southern California
Posts: 177
|
![]()
is it normal for the eheim 1250 pump to get quite warm to the touch?
link to setup (WARNING 56K users) It's probably because i've been running prime95 torture for almost 4hrs but here are my temps room - 89.8F cpu - 120F (MBM5) / 111.7F (Probe behind mobo) gpu - 107.7F (probe behind gpu card) system - 100F (MBM5)
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water |
![]() |
![]() |
![]() |
#2 |
Cooling Savant
Join Date: Apr 2003
Location: Blackburn / Dundee
Posts: 451
|
![]()
My eheim 1048 is also warm to the touvh... but I'm sure that's fine... not enough to make much of a difference to the diference to the water temperatures if you are running adequent cooling
|
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Apr 2002
Location: Southern California
Posts: 177
|
![]()
i would say my eheim is more warm-hot than a little warm
__________________
Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|