Setup redone with Clearflex (Warning 350k of Pictures!)

pippin88 · 08-23-2003, 06:33 AM

Redid my setup with my 2m of Clearflex.

The Clearflex is really nice stuff.

Running a Cascade, my own design and made by me GPU and NB blocks. Two Eheim 1048's in series and a BA rad with two Papst fans on low voltage.

Some of the pictures are of before it was filled, some of after. As you can see, I'm no master with the Camera.
Pictures:

http://pcdb.overclockers.com.au/pic....pippin88_2.jpg
http://pcdb.overclockers.com.au/pic....pippin88_3.jpg
http://pcdb.overclockers.com.au/pic....pippin88_4.jpg

Pumping setup:
In future this will be made more compact with the removal of the barbs between the pumps, and just a straigth thread to thread adaptor.

3Tap System:
I still need another EHEIM tap.

Filling the System:

Cables neatly tucked away:

http://pcdb.overclockers.com.au/view...in88&page=pics

For some reason pictures arn't displaying here. Working on every other forum

pippin88 · 08-23-2003, 07:45 PM

Well here's the designs for a box to sit underneath
I've been designing a box to sit under my Lian Li PC-60. I originally wanted to use brushed Alu, but that was going to be a problem and have since been offered some access to a Laser cutting machine capable of cutting through perspex.

Here is my design so far:

While it isn't that clear, the two black objects in the foreground are fans, and the black object behind them is a 1048.

Main problem at the moment not the design, but how I'm going to run my watercooling exactly.

As I see it I have a few options:
1. Two fully separate circuits. One consists of a 1048, BA rad and Cascade WB, the other a 1048, LA and GPU, NB and any future blocks.

2. One circuit for all three blocks. Would probably need to upgrade to a Eheim 1250 and would prefer to change to a 3 fan, single pass radiator.

The fans depicted probably won't be in the final design, rather they will be connected to the radiator/s via shrouds, as the box isn't sealed and could be drawing air through places other than the radiator with the current fan positions.

Does anyone have any suggestions, comments or critisisms? I just can't decide the best way to set it up. Also would anyone possibly be interested in a box like this (Either just the box, or maybe a complete setup?) and what would you pay?

More pics:
http://www.users.bigpond.net.au/pipp...oxconcept1.jpg
http://www.users.bigpond.net.au/pipp...oxconcept2.jpg
http://www.users.bigpond.net.au/pipp...oxconcept3.jpg

The pumping and radiator design has changed somewhat, but the box is basically the same

08-23-2003, 06:33 AM	#1
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Setup redone with Clearflex (Warning 350k of Pictures!) Redid my setup with my 2m of Clearflex. The Clearflex is really nice stuff. Running a Cascade, my own design and made by me GPU and NB blocks. Two Eheim 1048's in series and a BA rad with two Papst fans on low voltage. Some of the pictures are of before it was filled, some of after. As you can see, I'm no master with the Camera. Pictures: http://pcdb.overclockers.com.au/pic....pippin88_2.jpg http://pcdb.overclockers.com.au/pic....pippin88_3.jpg http://pcdb.overclockers.com.au/pic....pippin88_4.jpg Pumping setup: In future this will be made more compact with the removal of the barbs between the pumps, and just a straigth thread to thread adaptor. 3Tap System: I still need another EHEIM tap. Filling the System: Cables neatly tucked away: http://pcdb.overclockers.com.au/view...in88&page=pics For some reason pictures arn't displaying here. Working on every other forum Last edited by pippin88; 08-24-2003 at 05:10 PM.

08-23-2003, 07:45 PM	#2
pippin88 Cooling Savant Join Date: Oct 2002 Location: Australia Posts: 285	Well here's the designs for a box to sit underneath I've been designing a box to sit under my Lian Li PC-60. I originally wanted to use brushed Alu, but that was going to be a problem and have since been offered some access to a Laser cutting machine capable of cutting through perspex. Here is my design so far: While it isn't that clear, the two black objects in the foreground are fans, and the black object behind them is a 1048. Main problem at the moment not the design, but how I'm going to run my watercooling exactly. As I see it I have a few options: 1. Two fully separate circuits. One consists of a 1048, BA rad and Cascade WB, the other a 1048, LA and GPU, NB and any future blocks. 2. One circuit for all three blocks. Would probably need to upgrade to a Eheim 1250 and would prefer to change to a 3 fan, single pass radiator. The fans depicted probably won't be in the final design, rather they will be connected to the radiator/s via shrouds, as the box isn't sealed and could be drawing air through places other than the radiator with the current fan positions. Does anyone have any suggestions, comments or critisisms? I just can't decide the best way to set it up. Also would anyone possibly be interested in a box like this (Either just the box, or maybe a complete setup?) and what would you pay? More pics: http://www.users.bigpond.net.au/pipp...oxconcept1.jpg http://www.users.bigpond.net.au/pipp...oxconcept2.jpg http://www.users.bigpond.net.au/pipp...oxconcept3.jpg The pumping and radiator design has changed somewhat, but the box is basically the same

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)