air bubbles in intake appear when turning on eheim

GenGoku · 08-29-2003, 05:51 PM

i'm redoing my tubing and am now using the 3/4" intake that came with the eheim 1250. when refilling the system and checking for bubbles, i noticed that the 3/4" barb appears to be spitting out air bubbles. each time i turn off/on the eheim, 3 or 4 small air bubbles rise to the surface (filling it in a basin). what would be causing this because the eheim is totally submerged.

i have a tube about 10cm long connecting to the 3/4" and using that gray screw to hold together the tube instead of worm clamps. the 10cm tube is sucking in water from the basin. the out take connects to the rest of the system.

[edit]
nevermind. the bubbles seem to have stopped after i created this post

. now only if was allowed to delete this post.

jaydee · 08-29-2003, 06:33 PM

Quote:

Originally posted by GenGoku

[edit]
nevermind. the bubbles seem to have stopped after i created this post . now only if was allowed to delete this post.

Nah, that isn't as much fun for pricks like me to bump the thread just to show your ignorance to all.

GenGoku · 08-30-2003, 02:35 AM

Quote:

Originally posted by jaydee116
Nah, that isn't as much fun for pricks like me to bump the thread just to show your ignorance to all.

ok...

jaydee · 08-30-2003, 10:29 AM

Quote:

Originally posted by GenGoku
ok...

Damn dude, don't have to get all definsive. Just a joke..... I had the same problems before myself. Chill out a little eh?

GenGoku · 08-30-2003, 02:37 PM

lol. don't read into the message too much

anyways, this thread isn't getting too productive. i'll drop it as is.

08-29-2003, 05:51 PM	#1
GenGoku Cooling Savant Join Date: Apr 2002 Location: Southern California Posts: 177	air bubbles in intake appear when turning on eheim i'm redoing my tubing and am now using the 3/4" intake that came with the eheim 1250. when refilling the system and checking for bubbles, i noticed that the 3/4" barb appears to be spitting out air bubbles. each time i turn off/on the eheim, 3 or 4 small air bubbles rise to the surface (filling it in a basin). what would be causing this because the eheim is totally submerged. i have a tube about 10cm long connecting to the 3/4" and using that gray screw to hold together the tube instead of worm clamps. the 10cm tube is sucking in water from the basin. the out take connects to the rest of the system. [edit] nevermind. the bubbles seem to have stopped after i created this post . now only if was allowed to delete this post. __________________ Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water Last edited by GenGoku; 08-29-2003 at 05:58 PM.

08-30-2003, 02:37 PM	#5
GenGoku Cooling Savant Join Date: Apr 2002 Location: Southern California Posts: 177	lol. don't read into the message too much anyways, this thread isn't getting too productive. i'll drop it as is. __________________ Lian Li PC65 / Enermax Thermal Monitor + Rheobus Fioneer 4x DVD-RW (Cendyne) Eheim1250 -> DTek ProCore -> WhiteWater -> Maze4 GPU (in series) AMD XP 1700b+ @ 2.3GHz (11.5x200@1.75v actual) GeForce 4 Ti4200 128MB 512MB DDR PC3200 HyperX 512MB DDR PC3200 TwinX (2x256) Abit NF7-S v2.0 Samsung SyncMaster 900NF Powered by Water

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)