![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Neophyte
Join Date: Sep 2002
Location: USA
Posts: 30
|
![]()
I have an ASUS P4PE board running an Intel P4 2.4. In searching for a quality block I've come to the conclusion that the D-Tek WW is the block to get. I was all ready to take the plunged and then looked at my board and noticed that there are no mounting holes for the block. How would I go about mounting this block for this P4PE board? Would I remove the stock HSF mounting bracket and use those holes?
Thanks in advance for your help and direction. IUnknown |
![]() |
![]() |
![]() |
#2 |
Big PlayerMaking Big Money
Join Date: Aug 2001
Location: irc.lostgeek.com #procooling.com
Posts: 4,782
|
![]()
yup that's right. Pull off the stock mounting clip and there will be 4 holes underneath.
|
![]() |
![]() |
![]() |
#3 |
Cooling Neophyte
Join Date: Sep 2002
Location: USA
Posts: 30
|
![]()
Man, was that a fast reply or what?!
So is it true that the holes beneath the HSF mounting bracket are stock holes that would work with any block? Am I on track with getting the WW? My plan is to get the following: WW - CPU Block DD Intel "Z" chipset block DD Maze4 GPU block I already have an Eheim 1250 and BIX. Thanks again to all that started and participate in this forum. It's been a HUGE help! |
![]() |
![]() |
![]() |
#4 |
Cooling Savant
Join Date: Mar 2003
Location: notts uk
Posts: 408
|
![]()
when you get the ww i would be intersted to see how the p4pe reports the temp drop.
i have a p4pe and cascade and when i replaced one of my home made water blocks with the casecade the cpu temps reported by the mother board never changed. what do cooling do you use at the moment ?
__________________
Folding , Folding , Folding ! |
![]() |
![]() |
![]() |
#5 |
Cooling Neophyte
Join Date: Sep 2002
Location: USA
Posts: 30
|
![]()
Currently I have the stock HSF that came with my retail CPU. What do you think of the other specs?
|
![]() |
![]() |
![]() |
#6 | |
Cooling Savant
Join Date: Mar 2003
Location: notts uk
Posts: 408
|
![]() Quote:
how do the z chip block's fit into the solder lugs on the p4pe boards is there some sort of clip thing. what stepping is the p4 2.4 chip ? i have a c stepping 2.53 running at 3.30 1.55 volts (thats the bios setting but when idle it's closer to 1.6 and under load 1.5)
__________________
Folding , Folding , Folding ! |
|
![]() |
![]() |
![]() |
#7 |
Cooling Neophyte
Join Date: Sep 2002
Location: USA
Posts: 30
|
![]()
I already have the BIX, so I'll keep using that. Yes, the Z-Block does mount with clips and springs. To be honest, I have no idea what the stepping is (is there someplace in the bios that displays that). I'm not overclocking and don't really plan to although that could change.
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|