![]() | ||
|
|
General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums. |
![]() |
Thread Tools |
![]() |
#1 |
Cooling Savant
Join Date: Mar 2002
Location: FL
Posts: 787
|
![]()
I am considering getting the Danger Den Radeon 9700 GPU block. My major concern with it is that the middle of the block, where I assume the highest temps would be, is not getting any water. Is this significant? Has anyone had any experience with this block?
Thanks.
__________________
When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer. |
![]() |
![]() |
![]() |
#2 |
Cooling Neophyte
Join Date: Nov 2002
Location: usa
Posts: 84
|
![]()
I have one on my Geforce 4 ti4400 in my other system, no clue how temps are though as that card doesn't have any way to monitor temps and I never added a thermal probe to check it, if you're getting a new one though i'd recomend getting the maze 4 based GPU block, I have that on my FX 5900 ultra, those commonly run around 80-100C under load with the stock heatsink, I get around 30C under load with the maze 4 GPU block, price wise the maze 4 GPU is actualy cheaper than the old one too as it's on sale, at non sale price it is only $3 more.
__________________
Athlon 64 3000+ Venice / Asus A8N-SLI Premium / 2X Corsair XMS 512mb PC3200 BFG 7800GTX / Audigy 2 / Dell FP2001 20.1" / Antec TruePower 2.0 TPII-550 WD Raptor 36.7GB / WD Raptor 74GB / Maxtor 120GB SATA Water Cooled: CPU Swiftech Storm / GPU Maze 4 / Danger Den Double Heater core / Eheim 1250 |
![]() |
![]() |
![]() |
#3 |
Cooling Savant
Join Date: Mar 2002
Location: FL
Posts: 787
|
![]()
will there be enough clearence for RAMsyncs?
__________________
When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer. |
![]() |
![]() |
![]() |
#4 |
Cooling Neophyte
Join Date: Aug 2002
Location: blah
Posts: 35
|
![]()
i have one of these , it made an improvement on my gf3 , but my GOD THOSE BARB PLACEMENT IS SO FREAKING ANNOYING if they were only straight and on one side
|
![]() |
![]() |
![]() |
#5 | |
Cooling Savant
Join Date: Mar 2002
Location: FL
Posts: 787
|
![]() Quote:
I plan on making 1 circuit that has a Maze4 cpu block, 120cm radiator, and swiftech pump. Another circuit that has a 120cm radiator, maze4 gpu vlock, zchip northbridge block and swiftech pump. Both will be drawing from the same res. (the DD 5.25-bay-res with 2 sets of holes).
__________________
When you do things right, people won't be sure youv'e done anything at all. Looking to buy/trade for used Deep Fryer and Vacume Pack Sealer. |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|