I'm Done!! - Page 2

Brad · 02-23-2002, 12:06 AM

it will only stuff up your voltages if you are running at no load, ie no computer, just connected to fans only. Otherwise, .2A or .3A isn't going to worry a psu rated at 40A on the 5v

dabhpr · 02-25-2002, 05:59 PM

I'm also running a 172mm Comair-Rotron (235 CFM) fan at 7 volts. Not effect on any of my other voltages.

I'd have to guess it's putting out about 150 CFM - and very quietly, too.

Other data: Dangerden Maze2 waterblock, lapped. Eheim 1250 pump, inline. 1/2"ID silicone tubing. Heatercore (from Dangerden) radiator.

Proc is an XP1700+ running at 1812 MHz (AGOGA, "Y", 0152). 1.80 vcore. Actually get higher clocks - and more stability - by LOWERING the vcore on this agoga core... the opposite of what I had going an XP1600 AGKGA core...

Brad · 02-25-2002, 06:31 PM

it's probably the heat thats stuffing you up with that voltage. How loud actually is it at 7v, like comparable to a 27cfm ystech 60mm, or less?

02-23-2002, 12:06 AM	#26
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	it will only stuff up your voltages if you are running at no load, ie no computer, just connected to fans only. Otherwise, .2A or .3A isn't going to worry a psu rated at 40A on the 5v __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-25-2002, 05:59 PM	#27
dabhpr Cooling Neophyte Join Date: Dec 2001 Location: Atlanta, GA, USA Posts: 11	I'm also running a 172mm Comair-Rotron (235 CFM) fan at 7 volts. Not effect on any of my other voltages. I'd have to guess it's putting out about 150 CFM - and very quietly, too. Other data: Dangerden Maze2 waterblock, lapped. Eheim 1250 pump, inline. 1/2"ID silicone tubing. Heatercore (from Dangerden) radiator. Proc is an XP1700+ running at 1812 MHz (AGOGA, "Y", 0152). 1.80 vcore. Actually get higher clocks - and more stability - by LOWERING the vcore on this agoga core... the opposite of what I had going an XP1600 AGKGA core... __________________ XP 2000_@1953. Watercooled: Maze2, Eheim 1250, heatercore, Comair-Rotron 172mm/235CFM fan, modded to 7 Volts; Epox 8K3A+MB, 768 MB Samsung PC2700, 46 GB IBM 7200/ATA100, Supermicro 760A case, 400W Sparkle, 3 Sanyo-Denki 92mm intakes, Visiontek (4401) GF3 Ti-200 @ 255/555 (modded to Quadro DCC) Intel Pro 10/100 NIC, DSI V.92 V/F/D modem, Santa Cruz Soundcard,16X/10X/40X Lite-On CDRW, 50X Acer CDROM 38CMax CPU, MB 26C, PS 26C Windows XP Professional

02-25-2002, 06:31 PM	#28
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	it's probably the heat thats stuffing you up with that voltage. How loud actually is it at 7v, like comparable to a 27cfm ystech 60mm, or less? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)