Brad... - Page 2

jaydee · 04-01-2002, 10:48 PM

Nice heavy box!!! 10pcs of 2" X 3" X 1/2" Copper stock and one end mill holder. About 20lbs. I will send it tomorrow at noon. Luckily the post Office is 1/4 mile from work.

Brad · 04-02-2002, 01:22 AM

well, maybe you could talk to a couple of the residents about buying power, to run it underground and through all the garages. if everyone does it, it may end up really cheap per person.

OcPunK · 04-02-2002, 07:34 AM

I wanna see how a block like that does

jaydee · 04-02-2002, 08:55 AM

Quote:

Originally posted by Brad
well, maybe you could talk to a couple of the residents about buying power, to run it underground and through all the garages. if everyone does it, it may end up really cheap per person.

Well I am not going to live here forever. Later this year I am going to be looking for a new APT or House. Someting with a garage that has power.

jaydee · 04-02-2002, 08:58 AM

Quote:

Originally posted by OcPunK

I wanna see how a block like that does

I did this one:

And it did alright. I have been planing on putting a Center inlet over the fins and use the others as outlets.

jaydee · 04-25-2002, 09:43 PM

Brad,

Havn't givin up yet!!! I just got back from a road trip and now I have to pack up and move out in the next few weeks. Once I get my endmill holder and am moved I am going to make a few of these blocks. I got a guy that need 2 blocks for his dully which I am going to probably use this design aswell. I just need to get the holder, move, and get the material!!!!

Brad · 04-26-2002, 04:04 AM

you useless bastard :P

when you do those two blocks for that Duallie, let me know how they perform

jaydee · 04-26-2002, 03:25 PM

Quote:

Originally posted by Brad
you useless bastard :P

when you do those two blocks for that Duallie, let me know how they perform

I will. Going to look for a new place to live Sunday and hopefully next weekend I can move. Tomorrow I have to finish the truck with new piston rings and main bearings. Then I will have something to move with.

Fixittt · 04-26-2002, 05:54 PM

Hey Jay is back!

Hope you had a good trip.

Well I got a few tool holders made, but they were out of center. Had run out on the tool. What a mess. Well I took my mill to the machine shop so that Paul (What a great guy) can test the new ones first. When they are done Ill send you a complete set. all the way to 1/2 in. Also if you go get a 3/8 edge finder, Ill include an aluminum one for the edge finder (I cant beelive you dont already have one!!!!!!)

Do you have a drill chuck for your mill? and if so, is it screwed onto a long shaft? If you can unscrew it and tell me the threads, I am getting some tool holders made that my little drill chuck will screw onto.

Glad your back my friend, hope the move goes well. Got some bad news on the health side this past week. Life is gonna really start to suck.

jaydee · 04-26-2002, 07:18 PM

Quote:

Originally posted by Fixittt
Hey Jay is back!

Hope you had a good trip.

Well I got a few tool holders made, but they were out of center. Had run out on the tool. What a mess. Well I took my mill to the machine shop so that Paul (What a great guy) can test the new ones first. When they are done Ill send you a complete set. all the way to 1/2 in. Also if you go get a 3/8 edge finder, Ill include an aluminum one for the edge finder (I cant beelive you dont already have one!!!!!!)

Do you have a drill chuck for your mill? and if so, is it screwed onto a long shaft? If you can unscrew it and tell me the threads, I am getting some tool holders made that my little drill chuck will screw onto.

Glad your back my friend, hope the move goes well. Got some bad news on the health side this past week. Life is gonna really start to suck.

Hey fixittt. Yes I do have a drill chuck like you describe. I will have to get back to you on the measurments though as everything is boxed up at the moment. Hopefully next weekend I will be moved in the new place. Probably will not have internet access though for a while untill they can get Cable or DSL hooked up there. Hell I don't even know where the new place is yet!!!

Hopefully I will find something Sunday.

Fixittt · 04-26-2002, 08:11 PM

<laugh> Want me to send you a ....<Rolling on the floorlaghing> Modem? <Laugh> heheheheh sorry I couldnt resist!

jaydee · 04-26-2002, 09:54 PM

Quote:

Originally posted by Fixittt
<laugh> Want me to send you a ....<Rolling on the floorlaghing> Modem? <Laugh> heheheheh sorry I couldnt resist!

I was at the hotel a few nights last week at a lightning speed of 16.8k!!! WooooooooHoooooo!!!!!

Damn that sucked. Nice to be back to 128K up 15000K down!!! I am not even going to get a phone at the new place. Got my cell phone for talking. Just going to get Cable or DSL right away.

Of caurse right away could be a couple weeks depending on "their" schedual.

Fixittt · 04-27-2002, 11:15 AM

wekks? lol your funny, try months...........

Brad · 04-27-2002, 07:47 PM

hmm, I've never had anything but 56k. I have downloaded over 3gb of stuff with it though

jaydee · 04-28-2002, 01:44 AM

Quote:

Originally posted by Fixittt
wekks? lol your funny, try months...........

It is a small city here so they are not so busy. Usually takes a week to get anything done.

Fixittt · 04-28-2002, 11:34 AM

well im in a small town, very very small.

and it took them months to get to me

04-02-2002, 01:22 AM	#27
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	well, maybe you could talk to a couple of the residents about buying power, to run it underground and through all the garages. if everyone does it, it may end up really cheap per person. __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-02-2002, 07:34 AM	#28
OcPunK Cooling Savant Join Date: Jun 2001 Location: Under ground cave in PA to keep PCs cool! Posts: 125	I wanna see how a block like that does __________________ www.1337info.com

04-26-2002, 04:04 AM	#32
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you useless bastard :P when you do those two blocks for that Duallie, let me know how they perform __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-26-2002, 05:54 PM	#34
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	Hey Jay is back! Hope you had a good trip. Well I got a few tool holders made, but they were out of center. Had run out on the tool. What a mess. Well I took my mill to the machine shop so that Paul (What a great guy) can test the new ones first. When they are done Ill send you a complete set. all the way to 1/2 in. Also if you go get a 3/8 edge finder, Ill include an aluminum one for the edge finder (I cant beelive you dont already have one!!!!!!) Do you have a drill chuck for your mill? and if so, is it screwed onto a long shaft? If you can unscrew it and tell me the threads, I am getting some tool holders made that my little drill chuck will screw onto. Glad your back my friend, hope the move goes well. Got some bad news on the health side this past week. Life is gonna really start to suck. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

04-26-2002, 08:11 PM	#36
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	<laugh> Want me to send you a ....<Rolling on the floorlaghing> Modem? <Laugh> heheheheh sorry I couldnt resist! __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

04-01-2002, 10:48 PM	#26
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Nice heavy box!!! 10pcs of 2" X 3" X 1/2" Copper stock and one end mill holder. About 20lbs. I will send it tomorrow at noon. Luckily the post Office is 1/4 mile from work.

04-25-2002, 09:43 PM	#31
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Brad, Havn't givin up yet!!! I just got back from a road trip and now I have to pack up and move out in the next few weeks. Once I get my endmill holder and am moved I am going to make a few of these blocks. I got a guy that need 2 blocks for his dully which I am going to probably use this design aswell. I just need to get the holder, move, and get the material!!!!

04-27-2002, 11:15 AM	#38
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	wekks? lol your funny, try months........... __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

04-27-2002, 07:47 PM	#39
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	hmm, I've never had anything but 56k. I have downloaded over 3gb of stuff with it though __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-28-2002, 11:34 AM	#41
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	well im in a small town, very very small. and it took them months to get to me __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)