About to order heater core - Page 3

DodgeViper · 02-22-2002, 08:47 AM

It's 7"-1/4" inches. Here is a photo of the same system using the same equipment. The shroud is just a different shape. I could have made the shroud not as tall, but because the center of the fan does not blow air onto the core I wanted the fans as far from the core as I could get them.

DodgeViper · 02-22-2002, 09:01 AM

Hey Jim, if your concern about the bottom cage and where to mount the HD's. You could always place the drives in a spare 5-1/4" bay.

Brad · 02-22-2002, 03:01 PM

you have room just below your psu for one or two hdds, and room above your psu for another hdd

Jim · 02-22-2002, 03:31 PM

DV-

Ok, looks good!
What is the item labeled "E"? Appears to be adjacent to your pump, looks like an Eheim BTW.
Also, which direction is the air moving through the heater core?

And...
How does it cool?

Jim

Brad · 02-22-2002, 03:38 PM

E looks like a fan to me. I presume his fans are blowing into the case

DodgeViper · 02-22-2002, 03:40 PM

That system pictured belongs to a member from another forum I hang out in. Here is the link. Hoot who owns the systems is very respected person at this forum. His post should help you. He is also using a Antec case.

http://forums.overclockers.ws/vb/sho...=Hoot+Goes+H2O

DodgeViper · 02-22-2002, 07:13 PM

Jim, here is a photo of my rad in the case. Once the system is completed it will have rounded cables and I plan to opening up the P/S and remove the P4 cables as I will never use them. There is plenty of room as Brad stated either above or below the P/S for additional HD. Also there is room as shown for the pump to sit on the bottom of the case. I just want to keep everything contained inside the case.

Jim · 02-22-2002, 08:07 PM

DV-
I am eager to see your setup fly, hurry up! LOL

You have kind of an oxymoron going on in there, radiator inside a case with a HSF on the processor.

Jim

DodgeViper · 02-22-2002, 09:15 PM

That HSF will go bye-bye once I get the water-cooling system going. The rad is only placed inside the case so you can have a visual of how it will fit.

02-22-2002, 03:01 PM	#53
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	you have room just below your psu for one or two hdds, and room above your psu for another hdd __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-22-2002, 03:38 PM	#55
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	E looks like a fan to me. I presume his fans are blowing into the case __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

02-22-2002, 09:01 AM	#52
DodgeViper Registered User Join Date: Feb 2002 Location: Tucson, Arizona Posts: 204	Hey Jim, if your concern about the bottom cage and where to mount the HD's. You could always place the drives in a spare 5-1/4" bay.

02-22-2002, 03:31 PM	#54
Jim Cooling Savant Join Date: Feb 2002 Location: Illinois Posts: 389	DV- Ok, looks good! What is the item labeled "E"? Appears to be adjacent to your pump, looks like an Eheim BTW. Also, which direction is the air moving through the heater core? And... How does it cool? Jim

02-22-2002, 03:40 PM	#56
DodgeViper Registered User Join Date: Feb 2002 Location: Tucson, Arizona Posts: 204	That system pictured belongs to a member from another forum I hang out in. Here is the link. Hoot who owns the systems is very respected person at this forum. His post should help you. He is also using a Antec case. http://forums.overclockers.ws/vb/sho...=Hoot+Goes+H2O

02-22-2002, 07:13 PM	#57
DodgeViper Registered User Join Date: Feb 2002 Location: Tucson, Arizona Posts: 204	Jim, here is a photo of my rad in the case. Once the system is completed it will have rounded cables and I plan to opening up the P/S and remove the P4 cables as I will never use them. There is plenty of room as Brad stated either above or below the P/S for additional HD. Also there is room as shown for the pump to sit on the bottom of the case. I just want to keep everything contained inside the case.

02-22-2002, 08:07 PM	#58
Jim Cooling Savant Join Date: Feb 2002 Location: Illinois Posts: 389	DV- I am eager to see your setup fly, hurry up! LOL You have kind of an oxymoron going on in there, radiator inside a case with a HSF on the processor. Jim

02-22-2002, 09:15 PM	#59
DodgeViper Registered User Join Date: Feb 2002 Location: Tucson, Arizona Posts: 204	That HSF will go bye-bye once I get the water-cooling system going. The rad is only placed inside the case so you can have a visual of how it will fit.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)