|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
Thread Tools |
12-09-2006, 07:05 AM | #1 |
Cooling Neophyte
Join Date: Dec 2006
Location: il
Posts: 1
|
705 n Dell storage unit
I purchased a used storage unit and the assist software will not see the unit. Could someone please let me know how to have the software see it. I have reset the defaults several times and the led light react as they should according to the manual. Thanks for your thoughts.
|
12-09-2006, 07:33 AM | #2 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: 705 n Dell storage unit
Make sure you have a cat5 cable. If assist does not see it, it is not on the network. Check your router logs to see if its there. Also make sure your not mac filtering and have enough address open. Are you using the reset procedure from this site or other source. There has been one floating around that is not correct.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|