|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
Thread Tools |
01-15-2011, 01:21 PM | #1 |
Cooling Neophyte
Join Date: Jun 2010
Location: Oklahoma
Posts: 15
|
1100 with no hard drive
I have a 1100 with no hard drive. I want to install a hard drive.
Does the OS for the 1100 reside on the drive or on the motherboard? Anyone know how I can install a hard drive to work in the 1100? Thanks for all the replies. |
01-15-2011, 01:35 PM | #2 |
Cooling Neophyte
Join Date: Jun 2006
Location: Buford, GA
Posts: 20
|
Re: 1100 with no hard drive
First go here:
http://forums.procooling.com/vbb/showthread.php?t=13820 Post #1 FAQ's for Specific Models 1x00 FAQ 2. My HD has failed. How do I replace it? A. The 1000v1 has the OS stored in flash ram, just install the hd. It takes about 10 min before you can connect to the web interface. B. If you have a 1000v2 or 1100 you must transfer the boot tracks from a working unit or by the use of image files. There are 2 different image files used to recover from a failed drive in the 1x00's. C. The 1000's normally use a 1000 image file, but if you get a 1 x 2 LED blinking pattern it requires the 2200.img file. D. The 1000v2 & 1100 requires an image file to be copied to the new drive. (Normally the 2200 image file) Note: You need to reinstall the OS after doing an image file recovery to replace any missing OS files. Then go here: http://forums.procooling.com/vbb/showthread.php?t=15648 regards...
__________________
1 Snap 2200 - 320GB (2 x 160GB Seagates), v4.0.860 Individual 1 Snap 2200 - 500GB (2 x 250GB Seagates), v4.0.860 Raid 1 2 Snap 1100 - 80GB (1 x 80GB WD800BB), v4.0.860 1 Snap 2000 v1 - 160GB (2 x 80GB Seagates), v4.0.860 Individual |
01-15-2011, 02:17 PM | #3 |
Cooling Neophyte
Join Date: Jun 2010
Location: Oklahoma
Posts: 15
|
Re: 1100 with no hard drive
I have a disk from a 1000. When I install it, the system led blinks once with the Disk LED and then the disk LED blinks separately while the system LED is on. Is the 1000 HDD compatible?
|
01-15-2011, 02:24 PM | #4 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: 1100 with no hard drive
Only one way to find out? Can you find it and access it?
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
01-15-2011, 03:16 PM | #5 |
Cooling Neophyte
Join Date: Jun 2010
Location: Oklahoma
Posts: 15
|
Re: 1100 with no hard drive
I tried to access it http://snap######/config. Nothing. Is there another way to access it?
Any idea what that LED pattern is? System 1x, Disk 2x, repeat. |
01-15-2011, 04:29 PM | #6 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: 1100 with no hard drive
Read the FAQ's, I have something on the 1 x 2 pattern.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
01-15-2011, 04:44 PM | #7 |
Cooling Neophyte
Join Date: Jun 2010
Location: Oklahoma
Posts: 15
|
Re: 1100 with no hard drive
OK, I have some work to do on this SNAP.
I'll get it done as time permits and I'll report back on the results. Thanks! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|