|
|
Snap Server / NAS / Storage Technical Goodies The Home for Snap Server Hacking, Storage and NAS info. And NAS / Snap Classifides |
Thread Tools |
03-13-2006, 05:16 PM | #1 |
Cooling Neophyte
Join Date: Feb 2006
Location: Roswell, GA
Posts: 19
|
Syntax in debug to turn off auto-power on
The auto-power on drives me nuts... I see it in the debug printout I did, but can't seem to get the syntax right.
This is a 4100, any ideas? Thanks. |
03-13-2006, 06:38 PM | #2 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Syntax in debug to turn off auto-power on
Not on my 2200 list.
Post the complete help line on it, I may be able to help. And if you would please send me the complete list of commands for the 4100 to my email, copy and paste as text. Would like to see what the different between the two.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
03-16-2006, 11:33 AM | #3 |
Cooling Neophyte
Join Date: Feb 2006
Location: Roswell, GA
Posts: 19
|
Re: Syntax in debug to turn off auto-power on
notice in Bios Flags it has the auto(reboot) I am assuming that is the power-on if power is lost...?
Code:
cd [directory] (like DOS or UNIX cd) wdir [path] QDL Quick Dir Lookup (QDL HELP for more info) acl (access contol list backup and restore commands) bios Flags (display bios flags) [+|- Auto(reboot)] [+|- Broadcast] [+|- Promiscuous] Lock (Lock the EEProm) Unlock (Unlock the EEProm) Flup [T=>TFTP, B=>Broadcast] International enable/disable language choice Model Model-Number OEM [1,2,3,4,5,6 or None] (OEM support) Pci (show pci devices) device registers) PlatformBytes Platform Major Minor Version (show platform bytes) CCR (show processor CCRs) bkplane-SN get (displays backplane serial num) set backplane serial num HardwareVersion (Write HW Version For BackPlane) (Read HW Version For BackPlane) PowerStatus (Get Power status from backplane) FanStatus (Get Fan status from backplane) HDDStatus (Get HDD status from backplane) config cmos dns ddd.ddd.ddd.ddd (DNS Server IP Address) serial-no (serial no/default/hex4th-hex5th-hex6th chars of ethernet addr) smtp-address ddd.ddd.ddd.ddd (SMTP Mail Server IP Address codepage number (set codepage) devices automount enable|disable (Auto-Mounting of devices at boot) config (individual/mirror/span/raid/xtra (=spare)) [dev,...] format dev [label ["comment"]] [/reinit [/nocore]] (format an unmounted device) fsck dev [[/fix /fixfatal /altsb]] (check device's filesystem) small SizeInMB dev0 ... devN info (same as "info devices") mount [dev] request to mount one or all devices predict (individual/mirror/span/raid) [dev,...] resync dev testparity dev unmount [force/dev] request to unmount one or all devices http enable/disable port port mailaddr add FATAL/ERROR/WARNING/RETURN address (add mail address default (set mail addresses to default) del mailaddr_handle (delete mail address) set handle F/E/W/R [address] (set mail address) ncp alternate_server name (set an alternate Snap server name for NCP) backup enable/disable (TSA backup support) sap SAP Support Level hopcount Hop Count usercount User Count nvram daemons number fsync enable/disable (filesystem fsync support) fullFS alert (alert when filesystem is more than this percent full) raid cache size (set raid cache size in MB) threads count (set raid thread count) resources filename (set alternate resources file) smtp port port to send email msgs through snmp info displays SNMP information ip-addrs ddd.ddd.ddd.ddd ... (sets up to 4 SNMP Trap IP Addresses) set {ENABLE/PUBLIC/PRIVATE/CONTACT/LOCATION/TRAPS} value sntp ip ddd.ddd.ddd.ddd sets time server IP Address, enable SNTP disable disable SNTP info displays SNTP information freq update time interval in seconds diag hirez [test calls] dhrystone [test runs] debug access-test full_path [user] [at_host] alloc failures Nth (Causes every Nth Alloction to fail) arp buf [verbose] cache dumpcore dump core ffs heap [Free/Alloc/Queues/Trim/Summary] display heap inet interface ipx log clear [Permanent/Temporary] (clears event log) testError minNum minNum maxNum mail address [msg] [subject] (send mail; send test mail if 'msg' not provided) mbuf [verbose] memory displays current memory stats monitor info ADM1024 [HexData] nfs [reset] (displays [resets] nfs statistical info) procs timers stop [timers start|stop|print] raid route sdb dump handle [recurse] (dump sdb objects) stats volitile/non-volitile/both validate repair tcp timers (enumerates timers) trace ui flags clear (clears the entire UI blob in sdb) diskexam DumpLabel raw-device DumpPrivate raw-device DumpFS raw-device FS# DumpCG raw-device CG# DumpInode raw-device inode# DumpDir raw-device sector# DumpSector raw-device sector# ethernet Fullduplex enable/disable speed [0=auto/10/100/1000] (get/set ethernet speed) TBI enable/disable MTU ide 48bitLBACounter get|reset fdb [all/summary/credentials/files/id/cache] hosts {name} [IP/MACHINE/USER {ip/name} [{pwd}]] info cmos (values stored in cmos) datetime (Current date and time) devices [logical/physical/partition [id]] groups [group_name] ip (find a computer by ip addr) log (Display event log Try info log help) mailaddr (Mail Addresses) maps (http mappings) mimes (mime types) mounts (currently mounted shares) name (find a computer by name ncp (ncp information) logins (users currently connected via ncp) nvram (values stored in old nvram structure) panic (last system panic information) protection shares (currently defined shares) smb [connections] (current smb info) snmp ups sntp users (local users defined) nfs [name] logged-on users currently logged (in sdb)) version xobjects (Externally Authenticated Users and Groups) thermal (Dump thermal monitor state) java Run Java class with arguments snaplet count (Return count of existing Snaplets) instances (Return count of instances of Snaplet) info get (Return Snaplet info by ID) set (Set Snaplet run-type, user, passwordinfo by ID) index (Return Snaplet info by index) id (Return Snaplet ID from index) create (Create Snaplet) start (Start Snaplet) stop (Start Snaplet) jvm engine enable/disable license {ADD/UPDATE/INFO} [{id} [{key-high-mid-low}]] ram (megabytes of RAM for JVM process) stack (Kbytes of RAM for JVM stack) ssl on/off sdb [save|dirty|bu [now|restore|delete diskId|mm/dd/yy hh:mi periodHrs] smb smb commands statd (Display or release locks monitored by statd) ip ddd.ddd.ddd.ddd (Show locked file(s) held by client at ip addr) hn hostname (Show locked file(s) held by hostname) fn filename (Show locked file(s) on specific file) simu_crash (forces locks to be re-established by clients) tcp window window size for tcp packets dir [path] ls [dirname] reboot [# of secs] (reboots system) rm path mv old-name new-name md path [RASHa] rd path power off (turn off the power, where supported) fsacl get [pathname] fsckmode dev (read current mode) mode (set mode: 1-10) quota switch dev (get current setting) get dev uid (get current settings) defaults dev (get default block and i-node quota) |
03-16-2006, 12:00 PM | #4 |
Thermophile
Join Date: Jul 2005
Location: Plano, TX
Posts: 3,135
|
Re: Syntax in debug to turn off auto-power on
You may need to enter "bios unlock" first.
Then "bios flags -auto" Then "bios lock" Be careful with this section. Here is were users changed the machine ID'd, didn't get it changed back before a auto reboot. Now the units are door stops. I know when you do certain functions the unit goes into a reboot. This flag may stop that.
__________________
1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820 |
03-16-2006, 12:06 PM | #5 |
Cooling Neophyte
Join Date: Feb 2006
Location: Roswell, GA
Posts: 19
|
Re: Syntax in debug to turn off auto-power on
probably won't mess with it then, no big deal was just annoying me.
|
03-16-2006, 12:19 PM | #6 |
Cooling Savant
Join Date: Aug 2004
Location: UK
Posts: 909
|
Re: Syntax in debug to turn off auto-power on
David - Is that any/much different?
Cause if so, ill add it to the wiki
__________________
Snap Server Help Wiki - http://wiki.procooling.com/index.php/Snap_Server Snap Server 2200 v3.4.807 2x 250GB Seagate Barracuda 7200.9 w/ UNIDFC601512M Replacement Fan "Did you really think it would be that easy??" Other NAS's 1x NSLU2 w/ 512mb Corsair Flash Voyager Running Unslung 6.8b 1x NSLU2 w/ 8Gb LaCie Carte Orange Running Debian/NSLU2 Stable 4.0r0 250GB LaCie Ethernet Disk Running Windows XP Embedded |
03-16-2006, 12:21 PM | #7 |
Cooling Neophyte
Join Date: Feb 2006
Location: Roswell, GA
Posts: 19
|
Re: Syntax in debug to turn off auto-power on
looks the same as the one on wiki
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|