Need G1/4" Thread to 1/2" ID tubing

ElMoIsEviL · 02-06-2006, 03:12 PM

Barb or Elbow Barb.

Wondering where I could get this from Canada/USA for an Alphacool NexXxoS NVXP-3 block. Need to connect the block to a 1/2"ID system.
Should look like this...

Very important.

Block Info:
Alphacool NVXP-3
Technical data:

Overall dimensions (without connections):
Length 91 mm, Width 136 mm, Height 24 mm
Weight: 482 gr.
Connections: G1/4"

Thanks guys..

BTW it's the same type of fitting that would fit this..

http://www.frozencpu.com/ex-res-82.html?id=ThcnZnJa

ElMoIsEviL · 02-06-2006, 03:45 PM

Looks like I found them

Danger Den High Flow fittings

Dirt Cheap too..

nikhsub1 · 02-06-2006, 04:17 PM

No I found them

Don't lie!

ElMoIsEviL · 02-06-2006, 04:20 PM

Yeah.. thanks for that... gonna be ubber nice to have those setup on my block.

Next thing is a new reservoir. This Criticool Waterplant is getting a little old now.

stev · 02-07-2006, 04:55 PM

Try ...

http://www.usplastic.com/catalog/pro...duct%5Fid=8136

http://www.usplastic.com/catalog/pro...duct%5Fid=7957

Even a better option ...

http://www.usplastic.com/catalog/pro...duct%5Fid=7790

And if you want to poke around the site for other fittings ...

http://www.usplastic.com/catalog/cat...e=18309&Page=1

nikhsub1 · 02-07-2006, 05:03 PM

stev, usplastics only carries NPT threaded fittings, no BSPP.

stev · 02-10-2006, 10:38 AM

Quote:

Originally Posted by nikhsub1

stev, usplastics only carries NPT threaded fittings, no BSPP.

Now that is a bummer.

Stev

02-06-2006, 03:12 PM	#1
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Need G1/4" Thread to 1/2" ID tubing Barb or Elbow Barb. Wondering where I could get this from Canada/USA for an Alphacool NexXxoS NVXP-3 block. Need to connect the block to a 1/2"ID system. Should look like this... Very important. Block Info: Alphacool NVXP-3 Technical data: Overall dimensions (without connections): Length 91 mm, Width 136 mm, Height 24 mm Weight: 482 gr. Connections: G1/4" Thanks guys.. BTW it's the same type of fitting that would fit this.. http://www.frozencpu.com/ex-res-82.html?id=ThcnZnJa __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling Last edited by ElMoIsEviL; 02-06-2006 at 03:23 PM.

02-06-2006, 03:45 PM	#2
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Re: Need G1/4" Thread to 1/2" ID tubing Looks like I found them Danger Den High Flow fittings Dirt Cheap too.. __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling

02-06-2006, 04:17 PM	#3
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	Re: Need G1/4" Thread to 1/2" ID tubing No I found them Don't lie! __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:

02-06-2006, 04:20 PM	#4
ElMoIsEviL Cooling Neophyte Join Date: Jan 2006 Location: Ottawa, Ontario Posts: 71	Re: Need G1/4" Thread to 1/2" ID tubing Yeah.. thanks for that... gonna be ubber nice to have those setup on my block. Next thing is a new reservoir. This Criticool Waterplant is getting a little old now. __________________ Asus P5N32-E SLI \| Intel Core 2 Extreme QX6700 @ 4.23GHz (Swiftech MCW5002-775T 226W Pelt) \| 4x1GB OCZ Special Ops DC PC2-6400 DDR2 XTC \| 2xBFG TECH GeForce 8800 GTX OC 768MB Water Cooled \| Sound Blaster X-Fi FaT@l1Ty FPS Sound Card \| 2x74GB WD Raptor 10,000 RPM RAID0 \| 2x320GB Seagate 7200.10 7,200 RPM RAID0 \| SuperCooled: Enterprise Custom Cooling

02-07-2006, 04:55 PM	#5
stev Cooling Neophyte Join Date: Feb 2005 Location: niagara falls Posts: 96	Re: Need G1/4" Thread to 1/2" ID tubing Try ... http://www.usplastic.com/catalog/pro...duct%5Fid=8136 http://www.usplastic.com/catalog/pro...duct%5Fid=7957 Even a better option ... http://www.usplastic.com/catalog/pro...duct%5Fid=7790 And if you want to poke around the site for other fittings ... http://www.usplastic.com/catalog/cat...e=18309&Page=1

02-07-2006, 05:03 PM	#6
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	Re: Need G1/4" Thread to 1/2" ID tubing stev, usplastics only carries NPT threaded fittings, no BSPP. __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)