MCP600 at 7v?

james111 · 07-15-2004, 06:55 PM

Can you run this pump at 7v instead of 12v? would it do any damage to the pump?

Cathar · 07-15-2004, 07:01 PM

No. The pump won't run at anything much below 10v. At 7v it will pump nothing.

jlrii · 07-15-2004, 08:58 PM

Why would you want to? They're very quite.

Ruiner · 07-16-2004, 07:11 AM

quIET, dammit.

nicozeg · 07-16-2004, 01:09 PM

Quiet????

I'ts actually the noisiest piece of my system, even when dampened with a foam base.

anyway, I'm a lot less tolerant to noise than most people.

Tempus · 07-16-2004, 02:22 PM

Its fairly silent in my setup. Only thing I can hear is (occassionally) the vibration, which is more felt than heard.

quicksilverXP · 07-16-2004, 05:07 PM

I think noise is different for many people. But in comparison to an Eheim 1048 or 1046, the MCP600 is quite loud.

bobkoure · 07-16-2004, 05:15 PM

The only pump I've run into that's quieter than the 1046 is the HPPS (essentially a 12VDC 1046 with larger diameter pump rotor - so higher pressures than the 1046 - maybe even higher than the 1048, but I haven't found any trustworthy test figures...)

07-15-2004, 06:55 PM	#1
james111 Cooling Neophyte Join Date: Apr 2003 Location: al Posts: 21	MCP600 at 7v? Can you run this pump at 7v instead of 12v? would it do any damage to the pump?

07-16-2004, 02:22 PM	#6
Tempus Cooling Savant Join Date: Jul 2003 Location: Michigan, USA Posts: 456	Its fairly silent in my setup. Only thing I can hear is (occassionally) the vibration, which is more felt than heard. __________________ Thou art God.

07-15-2004, 07:01 PM	#2
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	No. The pump won't run at anything much below 10v. At 7v it will pump nothing.

07-15-2004, 08:58 PM	#3
jlrii Cooling Savant Join Date: Feb 2004 Location: Massachusetts, USA Posts: 158	Why would you want to? They're very quite.

07-16-2004, 07:11 AM	#4
Ruiner Cooling Savant Join Date: May 2003 Location: New Smyrna, FL Posts: 258	quIET, dammit.

07-16-2004, 01:09 PM	#5
nicozeg Cooling Savant Join Date: Sep 2002 Location: Santiago, Chile Posts: 403	Quiet???? I'ts actually the noisiest piece of my system, even when dampened with a foam base. anyway, I'm a lot less tolerant to noise than most people.

07-16-2004, 05:07 PM	#7
quicksilverXP Cooling Neophyte Join Date: Jun 2004 Location: Irvine Posts: 58	I think noise is different for many people. But in comparison to an Eheim 1048 or 1046, the MCP600 is quite loud.

07-16-2004, 05:15 PM	#8
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	The only pump I've run into that's quieter than the 1046 is the HPPS (essentially a 12VDC 1046 with larger diameter pump rotor - so higher pressures than the 1046 - maybe even higher than the 1048, but I haven't found any trustworthy test figures...)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)