WC setup for Sale

Jester4176 · 11-17-2004, 01:47 PM

Ok folks, I need some cash and this WC setup has to go. None of these parts were ever installed in my computer. I did however run a loop with the pump, radiator and block for all of 10 minutes. After using them, they were dried out thoroughly. Up for grabs are these items:

BIP II w/fans attached
Bay Res 2
Maze3 Intel block w/mounting hardware
Criticool PCI card
4 fan Vantec controller for floppy bay
Eheim 1250
20-ish feet of McMaster Carr premium tubing
12 hose clamps
Various fittings
Various lengths/diameter of hose
Swiftech fill n’ bleed kit
4-120mm fans already mounted to rad
Flashing to complete the radiator enclosure
Teflon tape for fittings
Heatsink lapping kit(Heatsink has already been lapped, just a little oxidized)

It's an all in 1 kit for someone out there. hook it up and go. I'm asking $225 which is MUCH less than I paid for all this, but hey...I need the $$$. I have some pics to post, just not sure how to. Most of these items are still in the box. Serious inqueries please pm and I'll e-mail ya the pics. OR, if someone tells me how, I'll post the pics here.

psychofunk · 11-17-2004, 02:59 PM

I need the BIPII if you part out

ThyKingdomCome · 11-17-2004, 04:23 PM

dibs on the 1250, should you part out.

Jester4176 · 11-18-2004, 09:44 AM

I'm actually looking to sell it as a kit. I just don't have the time to make daily trips to the post office, which isn't that close, and ship items. I'll ship the entire kit in one box for anyone who wants it. Price is negotiable, but less than $225 and buyer pays shipping. I'll pay shipping to the lower 48 states for my asking price.

11-17-2004, 01:47 PM	#1
Jester4176 Cooling Neophyte Join Date: Oct 2003 Location: Houston, Texas...USA! Posts: 8	WC setup for Sale Ok folks, I need some cash and this WC setup has to go. None of these parts were ever installed in my computer. I did however run a loop with the pump, radiator and block for all of 10 minutes. After using them, they were dried out thoroughly. Up for grabs are these items: BIP II w/fans attached Bay Res 2 Maze3 Intel block w/mounting hardware Criticool PCI card 4 fan Vantec controller for floppy bay Eheim 1250 20-ish feet of McMaster Carr premium tubing 12 hose clamps Various fittings Various lengths/diameter of hose Swiftech fill n’ bleed kit 4-120mm fans already mounted to rad Flashing to complete the radiator enclosure Teflon tape for fittings Heatsink lapping kit(Heatsink has already been lapped, just a little oxidized) It's an all in 1 kit for someone out there. hook it up and go. I'm asking $225 which is MUCH less than I paid for all this, but hey...I need the $$$. I have some pics to post, just not sure how to. Most of these items are still in the box. Serious inqueries please pm and I'll e-mail ya the pics. OR, if someone tells me how, I'll post the pics here.

11-17-2004, 04:23 PM	#3
ThyKingdomCome Cooling Neophyte Join Date: Apr 2003 Location: Arlington USA Posts: 21	dibs on the 1250, should you part out. __________________ ---------------------- ThyKingdomCome "Seek and you will find, knock and the door will be open to you"

11-17-2004, 02:59 PM	#2
psychofunk Cooling Savant Join Date: Jan 2003 Location: Los Angeles Posts: 365	I need the BIPII if you part out

11-18-2004, 09:44 AM	#4
Jester4176 Cooling Neophyte Join Date: Oct 2003 Location: Houston, Texas...USA! Posts: 8	I'm actually looking to sell it as a kit. I just don't have the time to make daily trips to the post office, which isn't that close, and ship items. I'll ship the entire kit in one box for anyone who wants it. Price is negotiable, but less than $225 and buyer pays shipping. I'll pay shipping to the lower 48 states for my asking price.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)