6600 agp wb

watercoolerking · 08-20-2005, 06:13 AM

6600一体的显卡水冷

BRiT · 08-20-2005, 08:57 AM

Looks overly restrictive...

tong · 08-20-2005, 12:00 PM

If i'm correct the copper is completely flat except for the slits cut in it. the channels and bends are cut out of the acrylic.

jaydee · 08-20-2005, 12:07 PM

Nice way to cut weight down. I suspect the base is way to thick though. Those inlets and outlets look oddly restrictive. Might want to consider making an all lexan outer shell with a copper insert over the GPU and memory. Would significantly reduce weight and mill time and copper cost.

Do you actually sell any of this stuff or just making it for the hell of it?

starbuck3733t · 08-20-2005, 10:13 PM

I've been contemplating doing something similar jaydee... I've got a lot of 1" thick plexi and some 1/8" copper plate. Since I have no real mill (just a drill press and an X/Y vise) milling the lips in the plexi would be pretty easy, and I could set the depth differently for the lips for the memory, so they stick out further, or not as far as the card requires. Plus, as you've said, it would be really light.

08-20-2005, 06:13 AM	#1
watercoolerking Cooling Neophyte Join Date: Aug 2003 Location: Dalian China Posts: 56	6600 agp wb 6600一体的显卡水冷 __________________ MSN: watercoolerking@msn.com

08-20-2005, 08:57 AM	#2
BRiT Cooling Neophyte Join Date: May 2005 Location: Cleveland, OH Posts: 39	Looks overly restrictive... __________________ --\|BRiT\| / WTF?! "That which does not kill you, makes you wish it did."

08-20-2005, 12:00 PM	#3
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	If i'm correct the copper is completely flat except for the slits cut in it. the channels and bends are cut out of the acrylic. __________________ My Heatware My Ebay

08-20-2005, 10:13 PM	#5
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	I've been contemplating doing something similar jaydee... I've got a lot of 1" thick plexi and some 1/8" copper plate. Since I have no real mill (just a drill press and an X/Y vise) milling the lips in the plexi would be pretty easy, and I could set the depth differently for the lips for the memory, so they stick out further, or not as far as the card requires. Plus, as you've said, it would be really light. __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.

08-20-2005, 12:07 PM	#4
jaydee Put up or Shut Up Join Date: Dec 2001 Location: Spokane WA Posts: 6,506	Nice way to cut weight down. I suspect the base is way to thick though. Those inlets and outlets look oddly restrictive. Might want to consider making an all lexan outer shell with a copper insert over the GPU and memory. Would significantly reduce weight and mill time and copper cost. Do you actually sell any of this stuff or just making it for the hell of it?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)