which is best for me

mrbeef · 05-03-2006, 03:46 PM

which of these sets of pumps would be best for my rig
ive got a cpu block 2 gfx blocks and a chipset block on a 120.3 rad

would two of these be best
C-Systems CSP750 Mark II (Black)

http://store.over-clock.com/Pumps___Accessories.html

or one of these
http://komplett.co.uk/k/ki.asp?sku=311679

and is there anywhere cheaper to get them in the uk ?

ive only ever had watercooling once and that went bad so any advice welcome

thanks mike

ProHandyman · 05-04-2006, 05:07 PM

Most here will tell you any of the Laing based pumps would be fine. Forget the C-Systems... they are like the plague here on this site!

Search the forums, there are many threads dealing with recommended pumps, noise levels, head, and flow-rates.

mrbeef · 05-04-2006, 05:34 PM

what about the dangerden D5 would that be enough to power the 2 gfx blocks the cpu and chipset and the tripple 120mm rad and a res ?

ProHandyman · 05-04-2006, 07:02 PM

Quote:

Originally Posted by mrbeef

what about the dangerden D5 would that be enough to power the 2 gfx blocks the cpu and chipset and the tripple 120mm rad and a res ?

Yes, the D5 (Laing manufactured) would be capeable of the system you are proposing. I have basically th same setup, but only 1 gpu, but a DD-HDD cooler... and flow rates are OK (though I have not taken a timed flow rate check).

Long Haired Git · 05-04-2006, 10:50 PM

Approximator BETA

mrbeef · 05-05-2006, 10:58 AM

cool will be ordering parts when i get the money should be soon i hope

Brians256 · 05-08-2006, 01:18 PM

Quote:

Originally Posted by ProHandyman

Most here will tell you any of the Laing based pumps would be fine. Forget the C-Systems... they are like the plague here on this site!

Search the forums, there are many threads dealing with recommended pumps, noise levels, head, and flow-rates.

Be very careful here. We've seen a lot of anecdotal evidence that the pumps fail. However, I wouldn't bet my house on it being a bad design. What I will say is that C-Systems did not show an ability to quickly handle customer problems when they did arise.

Remember that we may not be seeing a truly representative sample when we see issues. I'd like for us to see the failure data from both Laing and C-Systems, but I'm sure that they would not release such sensitive information.

I just wish I had a quieter pump than the Laing D5's that I have. I'm really tempted to switch out for an Eheim 1250 that I have laying around and see if it has enough oomph to keep the system within tolerances.

ProHandyman · 05-08-2006, 04:20 PM

Somewhere in the forums I have seen then posting that C-systems is no longer retailing pumps. They will only be oem manufacturing... and will not specify for whom they will be doing this. See Here: http://forums.procooling.com/vbb/sho...16&postcount=2

Brians256 · 05-08-2006, 06:54 PM

This is probably for the best. They weren't really set up to do retail.

05-03-2006, 03:46 PM	#1
mrbeef Cooling Neophyte Join Date: May 2006 Location: cornwall Posts: 7	which is best for me which of these sets of pumps would be best for my rig ive got a cpu block 2 gfx blocks and a chipset block on a 120.3 rad would two of these be best C-Systems CSP750 Mark II (Black) http://store.over-clock.com/Pumps___Accessories.html or one of these http://komplett.co.uk/k/ki.asp?sku=311679 and is there anywhere cheaper to get them in the uk ? ive only ever had watercooling once and that went bad so any advice welcome thanks mike Last edited by mrbeef; 05-03-2006 at 06:24 PM.

05-04-2006, 05:07 PM	#2
ProHandyman Cooling Neophyte Join Date: Jul 2005 Location: Upstate NY, USA Posts: 85	Re: which is best for me Most here will tell you any of the Laing based pumps would be fine. Forget the C-Systems... they are like the plague here on this site! Search the forums, there are many threads dealing with recommended pumps, noise levels, head, and flow-rates. __________________ "There are certain times when one's knowledge has a limit. I suggest you watch and learn this time." A pessimist's blood type is always B-negative.

05-04-2006, 05:34 PM	#3
mrbeef Cooling Neophyte Join Date: May 2006 Location: cornwall Posts: 7	Re: which is best for me what about the dangerden D5 would that be enough to power the 2 gfx blocks the cpu and chipset and the tripple 120mm rad and a res ?

05-04-2006, 10:50 PM	#5
Long Haired Git Cooling Savant Join Date: Jan 2003 Location: Sydney, Oz Posts: 336	Re: which is best for me Approximator BETA __________________ Long Haired Git "Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford) My Rig, in all its glory, can be seen best here AMD XP1600 @ 1530 Mhz \| Soyo Dragon + \| 256 Mb PC2700 DDRAM \| 2 x 40 Gb 7200rpm in Raid-0 \| Maze 2, eheim 1250, dual heater cores! \| Full specifications (PCDB)

05-05-2006, 10:58 AM	#6
mrbeef Cooling Neophyte Join Date: May 2006 Location: cornwall Posts: 7	Re: which is best for me cool will be ordering parts when i get the money should be soon i hope

05-08-2006, 04:20 PM	#8
ProHandyman Cooling Neophyte Join Date: Jul 2005 Location: Upstate NY, USA Posts: 85	Re: which is best for me Somewhere in the forums I have seen then posting that C-systems is no longer retailing pumps. They will only be oem manufacturing... and will not specify for whom they will be doing this. See Here: http://forums.procooling.com/vbb/sho...16&postcount=2 __________________ "There are certain times when one's knowledge has a limit. I suggest you watch and learn this time." A pessimist's blood type is always B-negative.

05-08-2006, 06:54 PM	#9
Brians256 Pro/Staff Join Date: Oct 2001 Location: Klamath Falls, OR Posts: 1,439	Re: which is best for me This is probably for the best. They weren't really set up to do retail.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)