Mcw50

tong · 09-07-2006, 02:31 PM

Going to upgrade vidcards in one of my systems (AGP) and was wondering if the mcw50 fits the x800gto? Searched around a few sites and nothign was commented. Right now the purchase fate rests on what this block fits or doesn't. (don't feel like emptying everythign out again.

Madnys · 09-08-2006, 07:02 AM

It will fit http://www.swiftnets.com/products/mcw50.asp

Quoted for Swiftech Site
"The MCW50™ ships with a dual retention mechanism composed of spring loaded screws providing off-the-shelf compatibility with all ATI® Radeon™ products (including the latest X800 series) as well as nVidia® GForce™ families of products up to the GeForce 4.

Optional hold-down plates are available for nVidia FX, PCX, GeForce 6 and newest G70 series with their respective retention kits as shown below. The product can also be installed with other graphics processors by using permanent bonding agents, such as thermally conductive epoxies. Swiftech guarantees compatibility with ATI and nVidia reference models only. "

If you happen to upgrade to the ati x1800 tho you will be out of luck as they use the 4 hole mounting, the two hole mounting solution applies to all 7000-8000-9000 and x000's and x1300-x1600 but im not sure about the x1650

heres the list of 4 hole mounting GFX cards from nvidia the ones that say yes you would need to purchess a hold down plate for it to fit. http://www.swiftnets.com/products/NV...PATIBILITY.asp
im not sure how all the no's are mounted so im not gonna say yes or no with these do you own research.

try looking alittle harder next time, this was found using google on the first page in less than 5 min

tong · 09-08-2006, 11:19 AM

I saw taht to but wanted real world advice, maybe somone in here had tried it and it worked but wasn't worth the extreme meashures he had to used to get it to. Thanks anyways

Ruiner · 09-15-2006, 04:50 PM

I have it on my vanilla x800. It fits, but isn't as easy to mount as a 4 bolt style.

09-07-2006, 02:31 PM	#1
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	Mcw50 Going to upgrade vidcards in one of my systems (AGP) and was wondering if the mcw50 fits the x800gto? Searched around a few sites and nothign was commented. Right now the purchase fate rests on what this block fits or doesn't. (don't feel like emptying everythign out again. __________________ My Heatware My Ebay

09-08-2006, 07:02 AM	#2
Madnys Cooling Neophyte Join Date: Aug 2006 Location: New Zealand Posts: 7	Re: Mcw50 It will fit http://www.swiftnets.com/products/mcw50.asp Quoted for Swiftech Site "The MCW50™ ships with a dual retention mechanism composed of spring loaded screws providing off-the-shelf compatibility with all ATI® Radeon™ products (including the latest X800 series) as well as nVidia® GForce™ families of products up to the GeForce 4. Optional hold-down plates are available for nVidia FX, PCX, GeForce 6 and newest G70 series with their respective retention kits as shown below. The product can also be installed with other graphics processors by using permanent bonding agents, such as thermally conductive epoxies. Swiftech guarantees compatibility with ATI and nVidia reference models only. " If you happen to upgrade to the ati x1800 tho you will be out of luck as they use the 4 hole mounting, the two hole mounting solution applies to all 7000-8000-9000 and x000's and x1300-x1600 but im not sure about the x1650 heres the list of 4 hole mounting GFX cards from nvidia the ones that say yes you would need to purchess a hold down plate for it to fit. http://www.swiftnets.com/products/NV...PATIBILITY.asp im not sure how all the no's are mounted so im not gonna say yes or no with these do you own research. try looking alittle harder next time, this was found using google on the first page in less than 5 min

09-08-2006, 11:19 AM	#3
tong Cooling Neophyte Join Date: Mar 2005 Location: Ludlow, MA Posts: 89	Re: Mcw50 I saw taht to but wanted real world advice, maybe somone in here had tried it and it worked but wasn't worth the extreme meashures he had to used to get it to. Thanks anyways __________________ My Heatware My Ebay

09-15-2006, 04:50 PM	#4
Ruiner Cooling Savant Join Date: May 2003 Location: New Smyrna, FL Posts: 258	Re: Mcw50 I have it on my vanilla x800. It fits, but isn't as easy to mount as a 4 bolt style.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)