Sythe Orochi - 10 heat pipe CPU cooler

ben333 · 03-04-2008, 02:59 PM

As seen here:
http://www.scythe-usa.com/product/cp...00_detail.html
The good news is that I managed to get one of these free and a review will be posted up here in a week or so

I'll stick the thread till the review comes (unless anyone has a reason not to

)

Discuss

ben333 · 03-04-2008, 03:03 PM

Well, I'll post my opinions in a different post (this one) so here are my thoughts:

Looks like it has more surface area than any other air cooler I've seen and should work well passively (or better than most)
But on the con side I'd be a bit worried for those with tower cases because, by the looks of it, this thing could cause some damage to the motherboard (but then again I have not seen the mounting gear)

jman1310 · 03-04-2008, 04:30 PM

see if you can remove the ram w/o removing the HS
looks like it might interfere

thideras · 03-04-2008, 04:49 PM

Hello all!

I will be the lucky reviewing this heatsink. I have quite a few tests that I would like to conduct on this to see what this heatsink can take. I have been wanting to test this since the first time I saw it!

I won't put my guesses out until the review. You will have to wait

ben333 · 03-04-2008, 04:55 PM

Well thid from what I've seen this will be a good one. And also pHaestus agreed to edit the article

billbartuska · 03-05-2008, 09:51 AM

Uh, kinda big?

ben333 · 03-05-2008, 11:47 AM

Hehe very true. I really would be scared to leave that motherboard in a tower case... I think the cooler's weight would twist and warp the board over time. Also you'd have one hell of a time getting it in most cases.

jaydee · 03-05-2008, 05:07 PM

Quote:

Originally Posted by billbartuska

Uh, kinda big?

I seen entire computers the size of that damn thing. Wonder what the designers had in mind for it. No way that fits in most cases. Must have some niche it is for?

UnaClocker · 03-12-2008, 03:28 PM

Quote:

Originally Posted by jaydee

I seen entire computers the size of that damn thing. Wonder what the designers had in mind for it. No way that fits in most cases. Must have some niche it is for?

Roof mount CarPC..

thideras · 03-16-2008, 09:13 PM

Started testing tonight. The tests will be on my QX9650 with speeds from 3.0 to 4.4 with 200mhz increments (400fsb with half multis ). I tested voltages so that it will be stable during these tests. I am doing multiple mounts to make our testing more accurate, so this is just the tip of the iceberg. I am not able to give impressions at this point, and I am only showing part of my data as I don't want to give everything away! Sorry about that

ben333 · 03-19-2008, 04:45 PM

thideras · 03-31-2008, 06:15 PM

Heatsink review is DONE. Just need to have pH look it over, upload the images and let it go live!!

UnaClocker · 04-26-2008, 08:16 PM

Give me 5 minutes alone with that thing.. I'll write a real review.

thideras · 04-27-2008, 10:36 AM

Quote:

Originally Posted by UnaClocker

Give me 5 minutes alone with that thing.. I'll write a real review.

Then do it.

ben333 · 04-27-2008, 01:36 PM

Quote:

Originally Posted by UnaClocker

Give me 5 minutes alone with that thing.. I'll write a real review.

Have you even seen it? It was posted on OC pulse because there was a bit of a ... disagreement between pH my reviewer and myself. Don't flame it if you have not even seen it. Una, hit me up next time around and I'll have it shipped to YOUR door, NP.

UnaClocker · 04-27-2008, 02:34 PM

Yeah, I read the ad.. I'm talkin review, that wasn't a review.

03-04-2008, 02:59 PM	#1
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Sythe Orochi - 10 heat pipe CPU cooler As seen here: http://www.scythe-usa.com/product/cp...00_detail.html The good news is that I managed to get one of these free and a review will be posted up here in a week or so I'll stick the thread till the review comes (unless anyone has a reason not to ) Discuss __________________ Pro Slacker

03-04-2008, 03:03 PM	#2
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Sythe Orochi - 10 heat pipe CPU cooler Well, I'll post my opinions in a different post (this one) so here are my thoughts: Looks like it has more surface area than any other air cooler I've seen and should work well passively (or better than most) But on the con side I'd be a bit worried for those with tower cases because, by the looks of it, this thing could cause some damage to the motherboard (but then again I have not seen the mounting gear) __________________ Pro Slacker

03-04-2008, 04:30 PM	#3
jman1310 Cooling Savant Join Date: Oct 2004 Location: Sunny Florida Posts: 246	Re: Sythe Orochi - 10 heat pipe CPU cooler see if you can remove the ram w/o removing the HS looks like it might interfere

03-04-2008, 04:49 PM	#4
thideras Cooling Neophyte Join Date: Sep 2007 Location: South Dakota Posts: 9	Re: Sythe Orochi - 10 heat pipe CPU cooler Hello all! I will be the lucky reviewing this heatsink. I have quite a few tests that I would like to conduct on this to see what this heatsink can take. I have been wanting to test this since the first time I saw it! I won't put my guesses out until the review. You will have to wait

03-04-2008, 04:55 PM	#5
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Sythe Orochi - 10 heat pipe CPU cooler Well thid from what I've seen this will be a good one. And also pHaestus agreed to edit the article __________________ Pro Slacker Last edited by ben333; 03-10-2008 at 02:45 PM.

03-05-2008, 11:47 AM	#7
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Sythe Orochi - 10 heat pipe CPU cooler Hehe very true. I really would be scared to leave that motherboard in a tower case... I think the cooler's weight would twist and warp the board over time. Also you'd have one hell of a time getting it in most cases. __________________ Pro Slacker

03-16-2008, 09:13 PM	#10
thideras Cooling Neophyte Join Date: Sep 2007 Location: South Dakota Posts: 9	Re: Sythe Orochi - 10 heat pipe CPU cooler Started testing tonight. The tests will be on my QX9650 with speeds from 3.0 to 4.4 with 200mhz increments (400fsb with half multis ). I tested voltages so that it will be stable during these tests. I am doing multiple mounts to make our testing more accurate, so this is just the tip of the iceberg. I am not able to give impressions at this point, and I am only showing part of my data as I don't want to give everything away! Sorry about that

03-19-2008, 04:45 PM	#11
ben333 Uber Pro/Mods Join Date: Aug 2007 Location: New Hampshire (USA) Posts: Two hundred somethin Posts: 432	Re: Sythe Orochi - 10 heat pipe CPU cooler __________________ Pro Slacker

03-31-2008, 06:15 PM	#12
thideras Cooling Neophyte Join Date: Sep 2007 Location: South Dakota Posts: 9	Re: Sythe Orochi - 10 heat pipe CPU cooler Heatsink review is DONE. Just need to have pH look it over, upload the images and let it go live!!

04-26-2008, 08:16 PM	#13
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Re: Sythe Orochi - 10 heat pipe CPU cooler Give me 5 minutes alone with that thing.. I'll write a real review. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

04-27-2008, 02:34 PM	#16
UnaClocker Cooling Savant Join Date: Apr 2000 Location: Bremerton, WA Posts: 514	Re: Sythe Orochi - 10 heat pipe CPU cooler Yeah, I read the ad.. I'm talkin review, that wasn't a review. __________________ The UnaClocker Watercooler Extraordinaire! Overclock till it goes BOOM!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)