FS : lots of stuff - special grab bag deals

warpath · 01-31-2002, 12:38 AM

both were used for appx. 3 months, they are garunteed in good contidition, and that is the final warranty from me.
The resevoir is a polished aluminum resevoir with a modded RIO model 400 submersible inside, the plug has been soldered in two points and is a flatheaded plug, pictures below.

The sidewinder is an all copper deep channel 1/2" fitting block with included 6-tab attachment clip, pictures below.

The sidewinder i want $34 shipped, the resevoir $45 - both for 70

vinyl tubing .50c /foot (.25c surcharge for actually going to HOME DEPOT and picking it up for the lazy person who doesn't get it themselves) + applicable shipping per weight, will only sell to person who buys either sidewinder or the resevoir/pump.

20X cd-rom IDE - $15 shipped

36x cd-rom IDE - $20 shipped

DEER 250w psu - $24 shipped

DEAD STUFF

Iwill KK266R - $30 shipped

hard drives - selling these as paperweights, $5 a piece + shipping or $40 shipped for all, 8 drives, assorted brands and sizes, some are fixable if you wish... LUCK OF THE DRAW... 45mb-10GB, there is one HUGE one that will weigh appx. 2x as much as the others, please specify if you wish to have this one. I will not sell it otherwise.

HARDWARE GRAB BAG
i have alot of assorted heatsinks and fans so i decided to make a small grab bag to reach my financial goals.. here are the identifiable items...

Taisol CGK - not sure which model, no clip or shroud.. aluminum base
ThermalRight CB-L - no fan, clip included
Speeze 1U - fan and clip included
2 Nidec Beta V 120mm - 90CFM - untailed or tailed, your choice, includes finger guards
5 unknown slot-type heatsinks, good for projects (IE hacksaw + large heatsink = lots of smaller heatsinks?)
2 pentium coolers, might make ok chipset coolers?
2 40mm fans - 1 AAVID, 1 evercool
1 60mm thin fan, unknown brand
1 chipset cooler from ABIT KT7a - pretty damn noisy...
1 chipset cooler without fan... good for a laugh but not much else ;0)

cooling grab bag $45 shipped

everything minus waterblock grab bag for $140 shipped

Purchased items will be shipped on a per-person basis, pre-payment is of course preferred, but not non-negotiable. All items are shipped USPS 2-3 day w/ delivery confirmation, any further package insurance must be negotiated before payment is made and all charges applicable would be additive to the final price.

email or respond in thread only please : warpath@voidyourwarranty.net

01-31-2002, 12:38 AM	#1
warpath Cooling Neophyte Join Date: Nov 2001 Location: Tucson AZ Posts: 28	FS : lots of stuff - special grab bag deals both were used for appx. 3 months, they are garunteed in good contidition, and that is the final warranty from me. The resevoir is a polished aluminum resevoir with a modded RIO model 400 submersible inside, the plug has been soldered in two points and is a flatheaded plug, pictures below. The sidewinder is an all copper deep channel 1/2" fitting block with included 6-tab attachment clip, pictures below. The sidewinder i want $34 shipped, the resevoir $45 - both for 70 vinyl tubing .50c /foot (.25c surcharge for actually going to HOME DEPOT and picking it up for the lazy person who doesn't get it themselves) + applicable shipping per weight, will only sell to person who buys either sidewinder or the resevoir/pump. 20X cd-rom IDE - $15 shipped 36x cd-rom IDE - $20 shipped DEER 250w psu - $24 shipped DEAD STUFF Iwill KK266R - $30 shipped hard drives - selling these as paperweights, $5 a piece + shipping or $40 shipped for all, 8 drives, assorted brands and sizes, some are fixable if you wish... LUCK OF THE DRAW... 45mb-10GB, there is one HUGE one that will weigh appx. 2x as much as the others, please specify if you wish to have this one. I will not sell it otherwise. HARDWARE GRAB BAG i have alot of assorted heatsinks and fans so i decided to make a small grab bag to reach my financial goals.. here are the identifiable items... Taisol CGK - not sure which model, no clip or shroud.. aluminum base ThermalRight CB-L - no fan, clip included Speeze 1U - fan and clip included 2 Nidec Beta V 120mm - 90CFM - untailed or tailed, your choice, includes finger guards 5 unknown slot-type heatsinks, good for projects (IE hacksaw + large heatsink = lots of smaller heatsinks?) 2 pentium coolers, might make ok chipset coolers? 2 40mm fans - 1 AAVID, 1 evercool 1 60mm thin fan, unknown brand 1 chipset cooler from ABIT KT7a - pretty damn noisy... 1 chipset cooler without fan... good for a laugh but not much else ;0) cooling grab bag $45 shipped everything minus waterblock grab bag for $140 shipped Purchased items will be shipped on a per-person basis, pre-payment is of course preferred, but not non-negotiable. All items are shipped USPS 2-3 day w/ delivery confirmation, any further package insurance must be negotiated before payment is made and all charges applicable would be additive to the final price. email or respond in thread only please : warpath@voidyourwarranty.net Last edited by warpath; 01-31-2002 at 12:41 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)