My water cooler.

DoeBoy · 07-16-2001, 03:11 PM

I am planning on getting a Maze2 from dangerden and an aquacoil(maybe the copper cube but I haven't decided) and most likely an eheim 1250....proabably a nice big fat 120mm panaflo fan on the radiator. What do yall think? Any suggestions or comments on any of this stuff?

Turbokeu · 07-18-2001, 04:07 AM

Ok, the Maze2 is a great performer (altough I bought the Swiftech MCW-462, the Maze2 has a lot of flow restriction when using 1/2" tubing).
The Eheim 1250 is a very good choice.
If I was you, I should take the AquaCoil II (less flow restriction than the Cube and perfect for 1/2" tubing).
Mine is located above the PSU. I bolted a 120mm grill to the mountings where the fan normally goes and made an aluminium shroud (0.5mm thick-anodized) of about 1" and bolted it on the other side to mount the fan (a Panaflo L1A). It's better to let the fan suck air trough the rad than blow,and it easier to mount the rad to the case.
CD

Musashi · 07-18-2001, 08:28 PM

I second the Aquacoil, FYI they revised the Maze2 to use 3/8" channeling and also removed some of the sharp turns(you have to request it). All the other stuff looks good but I'd honestly wait to see the results of the huge roundup here, you might be surprised. I'm going to take a sec to thank these guys at procooling for all their time they put into the site. It's become my personal favorite, especially since I'm about to get into water cooling. Great job.

07-16-2001, 03:11 PM	#1
DoeBoy Cooling Neophyte Join Date: Jul 2001 Posts: 7	My water cooler. I am planning on getting a Maze2 from dangerden and an aquacoil(maybe the copper cube but I haven't decided) and most likely an eheim 1250....proabably a nice big fat 120mm panaflo fan on the radiator. What do yall think? Any suggestions or comments on any of this stuff?

07-18-2001, 04:07 AM	#2
Turbokeu Cooling Savant Join Date: May 2001 Location: Brussels - Belgium Posts: 232	Ok, the Maze2 is a great performer (altough I bought the Swiftech MCW-462, the Maze2 has a lot of flow restriction when using 1/2" tubing). The Eheim 1250 is a very good choice. If I was you, I should take the AquaCoil II (less flow restriction than the Cube and perfect for 1/2" tubing). Mine is located above the PSU. I bolted a 120mm grill to the mountings where the fan normally goes and made an aluminium shroud (0.5mm thick-anodized) of about 1" and bolted it on the other side to mount the fan (a Panaflo L1A). It's better to let the fan suck air trough the rad than blow,and it easier to mount the rad to the case. CD __________________ My website: http://www.turbokeu.com Backup website: http://www2.turbokeu.com My company: http://www.kdcs.be

07-18-2001, 08:28 PM	#3
Musashi Cooling Neophyte Join Date: Jul 2001 Location: Nashua, NH Posts: 8	I second the Aquacoil, FYI they revised the Maze2 to use 3/8" channeling and also removed some of the sharp turns(you have to request it). All the other stuff looks good but I'd honestly wait to see the results of the huge roundup here, you might be surprised. I'm going to take a sec to thank these guys at procooling for all their time they put into the site. It's become my personal favorite, especially since I'm about to get into water cooling. Great job.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)