First post... be nice.

xRated · 05-27-2001, 04:17 AM

can i please have some comments and thoughts of the danger den maze 2 water block along with their copper coil radiator cos i'm really interested in getting them.

thanks.

gmat · 05-28-2001, 12:10 PM

Maze2 is da bomb ! Great block, great mounting system, great finish !
Danger Den are great dudes too, fast and reliable service... Go for it

mkosem · 05-28-2001, 09:14 PM

hmm, I hear there stuff is rated to really high pressure standards also. They did score best in the water block roundup.

--Matt

Joe · 05-28-2001, 10:22 PM

no true waterblock roundup has been run yet. The mother of all WB roundups are underway in the ProCooling "labs" ( my living room, on a cooling rig that looks like it belongs in a meth lab

)

watch for the roundup, it should be done in a number of weeks.. I got 20+ blocks to test.

Butcher · 05-28-2001, 10:29 PM

weeks?!
I can't wait that long... :P

Chill · 05-29-2001, 11:39 AM

The MAZE 2 is probably the best water block out there. Order it with 1/2 inch barbs. If your gonna use there cooling cube make sure you get a strong pump to push the water through. Alot of guys are using heatercores out of cars. Go to your local wrecking yard and pick up an all copper one cheap. Works just as well if not better than the cube at a fraction of the cost.

Joe · 05-29-2001, 12:51 PM

Quote:

Originally posted by Butcher:
weeks?!
I can't wait that long... :P

I work full time, so I am doing the roundup for about 5 hours a night, and all up coming weekends... it HOPEFULLY will not take weeks to do, but I am figure'n it will be close.

It will take a week to break down the data and write the round up itself. but this will be the answers for your questions, I promise that.

resago · 05-29-2001, 02:27 PM

maze2 and the cube RULE, although, I've seen good things out of a modded senfu radiator too.

05-27-2001, 04:17 AM	#1
xRated Cooling Neophyte Join Date: May 2001 Location: The Moon Posts: 17	First post... be nice. can i please have some comments and thoughts of the danger den maze 2 water block along with their copper coil radiator cos i'm really interested in getting them. thanks. __________________ 1.2Ghz AXIA @ 1.4Ghz 1.85V Abit KT7A 256 PC 133

05-28-2001, 10:22 PM	#4
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	no true waterblock roundup has been run yet. The mother of all WB roundups are underway in the ProCooling "labs" ( my living room, on a cooling rig that looks like it belongs in a meth lab ) watch for the roundup, it should be done in a number of weeks.. I got 20+ blocks to test. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.

05-28-2001, 10:29 PM	#5
Butcher Thermophile Join Date: May 2001 Location: UK Posts: 1,064	weeks?! I can't wait that long... :P __________________ Once upon a time, in a land far far away...

05-28-2001, 12:10 PM	#2
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	Maze2 is da bomb ! Great block, great mounting system, great finish ! Danger Den are great dudes too, fast and reliable service... Go for it

05-28-2001, 09:14 PM	#3
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	hmm, I hear there stuff is rated to really high pressure standards also. They did score best in the water block roundup. --Matt

05-29-2001, 11:39 AM	#6
Chill Cooling Neophyte Join Date: Apr 2001 Location: British Columbia, Canada Posts: 10	The MAZE 2 is probably the best water block out there. Order it with 1/2 inch barbs. If your gonna use there cooling cube make sure you get a strong pump to push the water through. Alot of guys are using heatercores out of cars. Go to your local wrecking yard and pick up an all copper one cheap. Works just as well if not better than the cube at a fraction of the cost.

05-29-2001, 02:27 PM	#8
resago Cooling Savant Join Date: Mar 2001 Location: state of denial Posts: 488	maze2 and the cube RULE, although, I've seen good things out of a modded senfu radiator too.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)