Dtek-customs radiators.

myepoxdied · 04-09-2002, 03:55 PM

I am looking at the dtek-customs radiators. It will be used in a 1/2" system with an eheim1250, and depending on the reviews, probably a maze3. I was looking at the Cooler core combo or the Pro combo which would perform better?

WebMasta33 · 04-09-2002, 04:32 PM

They're the same radiator... Just one's painted black and has sexy silver painted--or they're just silver in color-- barbs.

Haddy · 04-09-2002, 06:20 PM

yup the pro one is bad ace.....i wonder how they painted the core...that would determin if the preformence would suffer

Avatar28 · 04-09-2002, 06:39 PM

Quote:

Originally posted by Haddy
yup the pro one is bad ace.....i wonder how they painted the core...that would determin if the preformence would suffer

Just the sides are painted. The center is naturally a dark color. I'm actually going to order one and have him paint the center part too. The radiator's about 2 inches deep, so having a tiny bit of paint on the outside edges of the fins shouldn't have any real impact on performance.

BTW, Webmasta, the barbs are chrome.

myepoxdied · 04-09-2002, 08:31 PM

K, thx for the help guys sounds like a winner

now for the waterblock, its between the spir@l and the maze3. Anyone have any experience,links to reviews, anything on either of them?

Cyco-Dude · 04-09-2002, 08:36 PM

well, if you want a block NOW, id sy get the Maze3. the Spir@ls are backordered now...

to Haddy: well, the BI rads have painted fins....i wouldnt think it has a noticable affect on performance.

myepoxdied · 04-09-2002, 08:41 PM

The waterblock will probably be the last thing i order so, i don't need it right away. I won't need it for atleast a month.

WebMasta33 · 04-09-2002, 08:44 PM

Quote:

Originally posted by Cyco-Dude

well, the BI rads have painted fins....

I thought they were annodized, not painted.... :shrug:

Cyco-Dude · 04-09-2002, 08:53 PM

i believe they are painted. i'll be certain once HWlabs replies to my email...

dantheman · 04-09-2002, 10:08 PM

I just airbrushed my radiator. Its easy to do, and you can use any type of paint. whey buy that rad there for that much, when you can get it from autozone for 15 bucks, and then use a 99 cent thing of paint from hobby lobby?

redleader · 04-09-2002, 10:19 PM

Dtek puts a little paint on the outside, it only reaches in about 1/8 in so probably 85% of the rad's surface is unpainted.

Haddy · 04-09-2002, 11:29 PM

Quote:

Originally posted by WebMasta33

I thought they were annodized, not painted.... :shrug:

u can annodize copper?

Cyco-Dude · 04-09-2002, 11:58 PM

i got this from HWlabs:

Quote:

"The paint is kept to a minimum cosmetic thickness enough to look good and
protect the fins from corrosion."

didnt say anything about performance being affected; i wouldnt think it does with just a thin coat.

Brad · 04-10-2002, 02:16 AM

willie's told me it's to maximise the heat transfer while keeping it looking good.

we all know that unpainted is the best anyway

Avatar28 · 04-10-2002, 02:30 PM

Quote:

Originally posted by myepoxdied
The waterblock will probably be the last thing i order so, i don't need it right away. I won't need it for atleast a month.

You should be good then. Danny's been riding the guy at the shop that's supposed to start mass-producing the spir@ls for him. That's the main hold up now. When I asked a couple of days ago when I might be able to order one, he said he's hoping for about two weeks or so. So keep your fingers crossed.

WebMasta33 · 04-10-2002, 02:50 PM

That's gotta suck for D-tek, having a hot product, but not being able to sell it

Avatar28 · 04-11-2002, 11:33 AM

Yeah, he's pretty annoyed with it. But since Fixxit can't mill them fast enough, Danny's footing the bill to get them mass produced and out there. If not for him, nobody would have them though. I'll be in line to buy his new block as soon as it becomes available. He's not going to put it up until he gets his patent application sent off and is getting them mass produced.

Danny is using the prototype right now. He tells me that his core temps are almost right at water temp. I tell ya, I'm drooling for one.

ambient · 04-11-2002, 02:43 PM

Quote:

Danny is using the prototype right now. He tells me that his core temps are almost right at water temp. I tell ya, I'm drooling for one.

Hell no that is soo good. I thought it would perform that well just cause its so big. I guess I'll keep waiting. Any idea when they'll be available on the site? How long does that patent stuff take?

Avatar28 · 04-11-2002, 03:08 PM

He's hoping to have it soon. The patent searches are expensive. I think he said a grand or two. So he may just try to do it himself. I'll try to give him a call sometime in the next couple of days for an update. As long as the application has been received, he has some legal standing if someone tries to steal the design.

I've actually got a picture of the new design, but I can't share it yet until he gives me the okay. Plus I've nowhere to load it from. I've also got a sweet picture of the the spir@l with green dyelite. Pretty sharp looking. That I could share if I had some webspace to drop it on.

Cyco-Dude · 04-11-2002, 03:28 PM

cant you host it on these forums?
if its a .jpg or .gif, i could stick it on my homo-stead website until you can find something more permanent...just email it to me @ cyco_dude@hotmail.com

Avatar28 · 04-11-2002, 05:15 PM

Done.

Brad · 04-12-2002, 02:55 AM

so come on, where's this pic?

Avatar28 · 04-12-2002, 12:02 PM

If you've not seen it already, it's got it's own parallel thread.

Pyrotechnic · 04-12-2002, 07:59 PM

if you paint your heater core like i did, the paint only gets in about 2-3mm, and it still looks good.

04-09-2002, 03:55 PM	#1
myepoxdied Cooling Neophyte Join Date: Apr 2002 Posts: 19	Dtek-customs radiators. I am looking at the dtek-customs radiators. It will be used in a 1/2" system with an eheim1250, and depending on the reviews, probably a maze3. I was looking at the Cooler core combo or the Pro combo which would perform better?

04-09-2002, 04:32 PM	#2
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	They're the same radiator... Just one's painted black and has sexy silver painted--or they're just silver in color-- barbs. __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

04-10-2002, 02:16 AM	#14
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	willie's told me it's to maximise the heat transfer while keeping it looking good. we all know that unpainted is the best anyway __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-10-2002, 02:50 PM	#16
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	That's gotta suck for D-tek, having a hot product, but not being able to sell it __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========

04-12-2002, 02:55 AM	#22
Brad Thermophile Join Date: Oct 2001 Location: Nuu Zeeelin Posts: 3,175	so come on, where's this pic? __________________ 2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans 2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water

04-09-2002, 06:20 PM	#3
Haddy Cooling Savant Join Date: Mar 2002 Location: Mississippi Posts: 434	yup the pro one is bad ace.....i wonder how they painted the core...that would determin if the preformence would suffer

04-09-2002, 08:31 PM	#5
myepoxdied Cooling Neophyte Join Date: Apr 2002 Posts: 19	K, thx for the help guys sounds like a winner now for the waterblock, its between the spir@l and the maze3. Anyone have any experience,links to reviews, anything on either of them?

04-09-2002, 08:36 PM	#6
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	well, if you want a block NOW, id sy get the Maze3. the Spir@ls are backordered now... to Haddy: well, the BI rads have painted fins....i wouldnt think it has a noticable affect on performance.

04-09-2002, 08:41 PM	#7
myepoxdied Cooling Neophyte Join Date: Apr 2002 Posts: 19	The waterblock will probably be the last thing i order so, i don't need it right away. I won't need it for atleast a month.

04-09-2002, 08:53 PM	#9
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	i believe they are painted. i'll be certain once HWlabs replies to my email...

04-09-2002, 10:08 PM	#10
dantheman Cooling Savant Join Date: Jun 2001 Posts: 152	I just airbrushed my radiator. Its easy to do, and you can use any type of paint. whey buy that rad there for that much, when you can get it from autozone for 15 bucks, and then use a 99 cent thing of paint from hobby lobby?

04-09-2002, 10:19 PM	#11
redleader Thermophile Join Date: Jun 2001 Location: The deserts of Tucson, Az Posts: 1,264	Dtek puts a little paint on the outside, it only reaches in about 1/8 in so probably 85% of the rad's surface is unpainted.

04-11-2002, 11:33 AM	#17
Avatar28 Cooling Neophyte Join Date: Apr 2002 Posts: 47	Yeah, he's pretty annoyed with it. But since Fixxit can't mill them fast enough, Danny's footing the bill to get them mass produced and out there. If not for him, nobody would have them though. I'll be in line to buy his new block as soon as it becomes available. He's not going to put it up until he gets his patent application sent off and is getting them mass produced. Danny is using the prototype right now. He tells me that his core temps are almost right at water temp. I tell ya, I'm drooling for one.

04-11-2002, 03:08 PM	#19
Avatar28 Cooling Neophyte Join Date: Apr 2002 Posts: 47	He's hoping to have it soon. The patent searches are expensive. I think he said a grand or two. So he may just try to do it himself. I'll try to give him a call sometime in the next couple of days for an update. As long as the application has been received, he has some legal standing if someone tries to steal the design. I've actually got a picture of the new design, but I can't share it yet until he gives me the okay. Plus I've nowhere to load it from. I've also got a sweet picture of the the spir@l with green dyelite. Pretty sharp looking. That I could share if I had some webspace to drop it on.

04-11-2002, 03:28 PM	#20
Cyco-Dude Cooling Savant Join Date: Feb 2002 Location: Dayton, Ohio Posts: 836	cant you host it on these forums? if its a .jpg or .gif, i could stick it on my homo-stead website until you can find something more permanent...just email it to me @ cyco_dude@hotmail.com

04-11-2002, 05:15 PM	#21
Avatar28 Cooling Neophyte Join Date: Apr 2002 Posts: 47	Done.

04-12-2002, 12:02 PM	#23
Avatar28 Cooling Neophyte Join Date: Apr 2002 Posts: 47	If you've not seen it already, it's got it's own parallel thread.

04-12-2002, 07:59 PM	#24
Pyrotechnic Cooling Savant Join Date: Jan 2002 Location: Austin, TX Posts: 240	if you paint your heater core like i did, the paint only gets in about 2-3mm, and it still looks good.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)