where to buy T-line cap?

garie · 10-10-2002, 03:09 AM

Hi, im gonna put a t-line into my system and im trying to find a cap to plug the open end of the t-line. I've seen a few setups using caps like this but i dont know where to buy any.
heres an example of wat im talkinga bout...its the cap in the pic of G2koro's computer

pic of the cap

thanks!!

ezlid · 10-10-2002, 05:07 PM

A little hard to see in the pics. I got a male hose end repair kit at a local hardware store and a matching cap. Unscrew the cap to fill/bleed/empty the system. No leaks.
Here's what I'm talking about:
Hose Repair

Drummahjake · 10-11-2002, 01:04 PM

I had the same question, but I was thinking about using a barb and maybe getting or making a cap that would fit the threads.

bigben2k · 10-11-2002, 02:07 PM

You can use a 1/2 hose adapter (barb), and cap it with a 1/2 PVC threaded cap.

10-10-2002, 03:09 AM	#1
garie Cooling Neophyte Join Date: Aug 2002 Location: usa Posts: 17	where to buy T-line cap? Hi, im gonna put a t-line into my system and im trying to find a cap to plug the open end of the t-line. I've seen a few setups using caps like this but i dont know where to buy any. heres an example of wat im talkinga bout...its the cap in the pic of G2koro's computer pic of the cap thanks!!

10-11-2002, 02:07 PM	#4
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	You can use a 1/2 hose adapter (barb), and cap it with a 1/2 PVC threaded cap. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

10-10-2002, 05:07 PM	#2
ezlid Cooling Neophyte Join Date: Sep 2001 Location: Houston, TX Posts: 55	A little hard to see in the pics. I got a male hose end repair kit at a local hardware store and a matching cap. Unscrew the cap to fill/bleed/empty the system. No leaks. Here's what I'm talking about: Hose Repair

10-11-2002, 01:04 PM	#3
Drummahjake Cooling Neophyte Join Date: Oct 2002 Location: Eau Claire, WI Posts: 12	I had the same question, but I was thinking about using a barb and maybe getting or making a cap that would fit the threads.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)