A7N8X full vmods (includes NB !)

gmat · 01-27-2003, 05:13 AM

Hey,

For those skilled with a soldering iron, here are the vmods for the latest Asus jewel:

CPU & RAM:
http://www.nforcershq.com/modules.ph...article&sid=37

North Bridge: (i don't know if it affects the South Bridge as well)
http://www.xtremesystems.org/forums/...?threadid=8274

FSB @230, baby !

F18Viper · 01-27-2003, 07:57 AM

One question, where can i get setfsb? And I have the a7v8x kt400 mobo, will those mods still apply?

gmat · 01-27-2003, 08:11 AM

Quote:

Originally posted by F18Viper
One question, where can i get setfsb?

??? huh ??? One sets the FSB in the BIOS, if that's what you want. For the A7N8X you can get up to 211 with 1001 bios and up to 250 with 1002 (beta).

Quote:

And I have the a7v8x kt400 mobo, while those mods still apply? [/b]

Hum i wouldn't think so, every board has a different layout, especially there since the chipset is totally different.

F18Viper · 01-27-2003, 08:19 AM

I know u set your fsb in your bios, lol, but recently while reading some articles and posts people kept mentioning a program called setfsb. Its supposed to allow u to set the fsb without the need to access your bios. I have been looking all over but all i could find was some japanese website.

HMB · 01-27-2003, 09:22 AM

Is it possible to perform the VDD-mod with pomona grabbers? I will get a solderiron/multimeter etc when i get my salory this month but still it would be nice if it would work with grabbers.

pHaestus · 01-27-2003, 10:31 AM

HMB: should be no sweat. The IC legs look pretty well-separated to me.

g.l.amour · 01-27-2003, 10:40 AM

try looking in google for a prg called cpufsb

haven't tested it on latest athlon boards, but if u can find mfgr of ic then u can insert that info in cpufsb

F18Viper · 01-27-2003, 03:40 PM

Thanks for the info. Still looking for some voltage mods for the a7v8x. 1.85v is getting real annoying.

HMB · 01-27-2003, 03:45 PM

Quote:

Originally posted by pHaestus
HMB: should be no sweat. The IC legs look pretty well-separated to me.

Im sorry but I havent seen what leg i should connect the grabber to, ive only seen that u should connect the resistor(s) to the smd-resistor, not the IC... any1 have a pic of which leg i should attach the resistors to?

01-27-2003, 05:13 AM	#1
gmat Thermophile Join Date: Mar 2001 Location: France Posts: 1,221	A7N8X full vmods (includes NB !) Hey, For those skilled with a soldering iron, here are the vmods for the latest Asus jewel: CPU & RAM: http://www.nforcershq.com/modules.ph...article&sid=37 North Bridge: (i don't know if it affects the South Bridge as well) http://www.xtremesystems.org/forums/...?threadid=8274 FSB @230, baby !

01-27-2003, 07:57 AM	#2
F18Viper Cooling Neophyte Join Date: Dec 2002 Location: New York Posts: 30	One question, where can i get setfsb? And I have the a7v8x kt400 mobo, will those mods still apply? Last edited by F18Viper; 01-27-2003 at 08:20 AM.

01-27-2003, 09:22 AM	#5
HMB Cooling Neophyte Join Date: Aug 2002 Location: Sweden Posts: 63	Is it possible to perform the VDD-mod with pomona grabbers? I will get a solderiron/multimeter etc when i get my salory this month but still it would be nice if it would work with grabbers. __________________ Asus A7N8X Deluxe, 2500+@2700MHz (13,5x200), 2x256MB TwinMOS pc3200 @ 2-2-2-11, GFFX 5900 Ultra@500/950MHz, 2x120GB Maxtor Diamondmax 9 8MB SATA raid-0, Prometeia, Logitech z-680. 20000+ 3Dmark2001 Duron 600@1521MHz RIP

01-27-2003, 10:40 AM	#7
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	try looking in google for a prg called cpufsb haven't tested it on latest athlon boards, but if u can find mfgr of ic then u can insert that info in cpufsb __________________ yo soy un tiburón

01-27-2003, 08:19 AM	#4
F18Viper Cooling Neophyte Join Date: Dec 2002 Location: New York Posts: 30	I know u set your fsb in your bios, lol, but recently while reading some articles and posts people kept mentioning a program called setfsb. Its supposed to allow u to set the fsb without the need to access your bios. I have been looking all over but all i could find was some japanese website.

01-27-2003, 10:31 AM	#6
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	HMB: should be no sweat. The IC legs look pretty well-separated to me.

01-27-2003, 03:40 PM	#8
F18Viper Cooling Neophyte Join Date: Dec 2002 Location: New York Posts: 30	Thanks for the info. Still looking for some voltage mods for the a7v8x. 1.85v is getting real annoying.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)