Have a few questions..

Impulse16 · 03-09-2003, 01:18 AM

Hi, I’m fairly new to this dehumidifier cooling mod. So I have a few questions if you all would be so generous enough to help out a poor old n00b

1. What spec should I look for to be higher/lower or whatever for a dehumidifier that will enable it to cool the water better and colder.

2. What should the ratio water to anti freeze be in my cooling mix with this mod?

3. I'm thinking my setup will be about 7-10 feet away from my pc. Could anyone recommend a good pump for me? I hear iwaki is a good brand. What do you think would be a decent GPH for this distance?

4. If I do get an iwaki pump (I’m not familiar at all with it) will I have to mod it or anything to run 1/2" tubing on it?

Any help/input is very much appreciated.
Thanks a lot,

Chris

BrianW · 03-09-2003, 03:09 PM

Maybe you should of posted this in the Phase Change Cooling board....

Brian W

Impulse16 · 03-09-2003, 04:34 PM

aha, i didnt see the specific phase change talk. Thanks alot

03-09-2003, 01:18 AM	#1
Impulse16 Cooling Neophyte Join Date: Mar 2003 Location: Rochester, NY Posts: 3	Have a few questions.. Hi, I’m fairly new to this dehumidifier cooling mod. So I have a few questions if you all would be so generous enough to help out a poor old n00b 1. What spec should I look for to be higher/lower or whatever for a dehumidifier that will enable it to cool the water better and colder. 2. What should the ratio water to anti freeze be in my cooling mix with this mod? 3. I'm thinking my setup will be about 7-10 feet away from my pc. Could anyone recommend a good pump for me? I hear iwaki is a good brand. What do you think would be a decent GPH for this distance? 4. If I do get an iwaki pump (I’m not familiar at all with it) will I have to mod it or anything to run 1/2" tubing on it? Any help/input is very much appreciated. Thanks a lot, Chris

03-09-2003, 03:09 PM	#2
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Maybe you should of posted this in the Phase Change Cooling board.... Brian W __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

03-09-2003, 04:34 PM	#3
Impulse16 Cooling Neophyte Join Date: Mar 2003 Location: Rochester, NY Posts: 3	aha, i didnt see the specific phase change talk. Thanks alot

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)