Need Barbed Tee fitting

vfrjim · 09-06-2001, 07:33 AM

Looking for a 1/2 x 3/8 x 1/2 barbed tee fitting in brass/plastic/nylon, anyone know where I could find one?

Thanks!

Jim

GuyBFF · 09-06-2001, 05:56 PM

Home Depot and Revy in Winnipeg, MB (Canada) has them in brass, maybe your local location will as well.

vfrjim · 09-06-2001, 06:18 PM

I work for Home Depot, nope we don't carry them

anyone else, maybe someone could buy one and ship, I will pay u. Or better yet, could you go into the Home Depot and get me the SKU(6 digit #) so I can have it transfered into my store

thanks!

Jim

Jonas · 09-16-2001, 09:32 AM

you mean inlet of 1/2" and one out of 3/8" and one out of 1/2"?? do they even make that? thats seriously kickass if they do...infact if you have the sku pls post it so i can get one too!

zews · 09-16-2001, 04:50 PM

If you have Lowe's hardware where you're at, you might try there...that's where I get all the brass fittings I use. They also have a bunch of other materials too.

You could get a 1/2 x 1/2 x 1/2 T, and then just get a 1/2 to 3/8 adapter, then connect with a small section of tubing and clamps. I'm not an ME...but I think the pressure/flow through the joint would be equivalent to what you're lookin for.

Kevin · 09-17-2001, 02:54 AM

If you are using silicone hose, the 3/8" ID stuff will slip over a 1/2" ID barb... so you can just get a 3 way 1/2" ID tube.
-Kevin

09-06-2001, 07:33 AM	#1
vfrjim Cooling Neophyte Join Date: Jul 2001 Location: Rhode Island Posts: 77	Need Barbed Tee fitting Looking for a 1/2 x 3/8 x 1/2 barbed tee fitting in brass/plastic/nylon, anyone know where I could find one? Thanks! Jim

09-06-2001, 05:56 PM	#2
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	Home Depot and Revy in Winnipeg, MB (Canada) has them in brass, maybe your local location will as well. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...

09-16-2001, 09:32 AM	#4
Jonas Cooling Neophyte Join Date: Nov 2000 Location: Jackson, MI Posts: 94	you mean inlet of 1/2" and one out of 3/8" and one out of 1/2"?? do they even make that? thats seriously kickass if they do...infact if you have the sku pls post it so i can get one too! __________________ "...as soon as you're born you start dying; so you might as well have a good time..."

09-16-2001, 04:50 PM	#5
zews Cooling Neophyte Join Date: Sep 2001 Posts: 8	If you have Lowe's hardware where you're at, you might try there...that's where I get all the brass fittings I use. They also have a bunch of other materials too. You could get a 1/2 x 1/2 x 1/2 T, and then just get a 1/2 to 3/8 adapter, then connect with a small section of tubing and clamps. I'm not an ME...but I think the pressure/flow through the joint would be equivalent to what you're lookin for. __________________ "If A equals success, then the formula is A equals X plus Y plus Z. X is work. Y is play. Z is keep your mouth shut." -Albert Einstein

09-17-2001, 02:54 AM	#6
Kevin Slacking more than your weird uncle Join Date: Nov 2000 Location: San Diego, CA (UCSD) / Los Angeles, CA (home) Posts: 1,605	If you are using silicone hose, the 3/8" ID stuff will slip over a 1/2" ID barb... so you can just get a 3 way 1/2" ID tube. -Kevin __________________ I used to throw hot coffee all over the ass of the horse there, then whip him while he was kickin' at me. Those f***in things are crazy.

09-06-2001, 06:18 PM	#3
vfrjim Cooling Neophyte Join Date: Jul 2001 Location: Rhode Island Posts: 77	I work for Home Depot, nope we don't carry them anyone else, maybe someone could buy one and ship, I will pay u. Or better yet, could you go into the Home Depot and get me the SKU(6 digit #) so I can have it transfered into my store thanks! Jim

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)