What would you build?

t00lb0x · 06-07-2003, 02:10 PM

If you had $500 dollars to spend on cooling, what would you build?

I would get:
Danger DenMaze 4-1 (which ever holds a peltier)
266W Peltier
BIX2
2 Panofolio 120MM fans (118CFM I think)
2 Shrouds for the fans
Eheim 1250 pump

Sproket · 06-07-2003, 03:01 PM

Maybe a prommy is 450

www.iceepc.com

If worth considering

t00lb0x · 06-07-2003, 03:05 PM

Thats only the base unit though...

Sproket · 06-07-2003, 03:08 PM

But if you wanted a watercool setup w/ UV dye, then,

Whitewater block

A rad like this: http://www.chadandjodi.com/watercool/newcoil1.jpg
(for UV dye to work properly)

Some GPU block

Eheim 1250 or *Hydor L30 pump*

Clearflex 60 tubing 1/2"

2 Panaflo fans for Rad, 120mm

and get a clear side panel for your case or maybe buy a new case with a blow hole at top. Maybe even a clear case.

And a nice power supply! Antec true 430 or so

What type of mobo and cpu and memory do you have?

t00lb0x · 06-07-2003, 03:09 PM

Its not for me...I'm saving up for the Prommy Mach 2, but I have a few questions. Like what is the point of the "intel cpu kit"? Do you need to buy that ONTOP of the prommy unit itself?

Sproket · 06-07-2003, 03:14 PM

Sounds like mounting hardware, if thats the case then yes extra.

t00lb0x · 06-07-2003, 03:16 PM

Heh, I think I know what it is for. If you change from Intel to to AMD (or vice versa) you have to buy a new kit so it works. This is smart a person does not have to spend another 500 bucks on a new prommy. It does come with the bare unit though. What is seal string for anyways?

06-07-2003, 02:10 PM	#1
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	What would you build? If you had $500 dollars to spend on cooling, what would you build? I would get: Danger DenMaze 4-1 (which ever holds a peltier) 266W Peltier BIX2 2 Panofolio 120MM fans (118CFM I think) 2 Shrouds for the fans Eheim 1250 pump __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-07-2003, 03:01 PM	#2
Sproket Cooling Savant Join Date: Feb 2003 Location: Phoenix, AZ Posts: 193	Maybe a prommy is 450 www.iceepc.com If worth considering __________________ NF7-S Bios D1.8 218FSB X 11.5 1700+ DLT3C 0310 @ 2511Mhz TwinMos 2x256 PC3200 BH-5 Albatron TI4800se 310/643 3dmark 15,110 3DMark2001SE Link

06-07-2003, 03:05 PM	#3
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Thats only the base unit though... __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-07-2003, 03:08 PM	#4
Sproket Cooling Savant Join Date: Feb 2003 Location: Phoenix, AZ Posts: 193	But if you wanted a watercool setup w/ UV dye, then, Whitewater block A rad like this: http://www.chadandjodi.com/watercool/newcoil1.jpg (for UV dye to work properly) Some GPU block Eheim 1250 or Hydor L30 pump Clearflex 60 tubing 1/2" 2 Panaflo fans for Rad, 120mm and get a clear side panel for your case or maybe buy a new case with a blow hole at top. Maybe even a clear case. And a nice power supply! Antec true 430 or so What type of mobo and cpu and memory do you have? __________________ NF7-S Bios D1.8 218FSB X 11.5 1700+ DLT3C 0310 @ 2511Mhz TwinMos 2x256 PC3200 BH-5 Albatron TI4800se 310/643 3dmark 15,110 3DMark2001SE Link

06-07-2003, 03:09 PM	#5
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Its not for me...I'm saving up for the Prommy Mach 2, but I have a few questions. Like what is the point of the "intel cpu kit"? Do you need to buy that ONTOP of the prommy unit itself? __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

06-07-2003, 03:14 PM	#6
Sproket Cooling Savant Join Date: Feb 2003 Location: Phoenix, AZ Posts: 193	Sounds like mounting hardware, if thats the case then yes extra. __________________ NF7-S Bios D1.8 218FSB X 11.5 1700+ DLT3C 0310 @ 2511Mhz TwinMos 2x256 PC3200 BH-5 Albatron TI4800se 310/643 3dmark 15,110 3DMark2001SE Link

06-07-2003, 03:16 PM	#7
t00lb0x Cooling Savant Join Date: May 2003 Location: In a box Posts: 221	Heh, I think I know what it is for. If you change from Intel to to AMD (or vice versa) you have to buy a new kit so it works. This is smart a person does not have to spend another 500 bucks on a new prommy. It does come with the bare unit though. What is seal string for anyways? __________________ "If you can't dazzle them with brilliance, baffle them with bullshit"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)