For Sale: Extreme Cooling Gear, priced to move

[Gizmologist]

For Sale:

1. Thermotek Cold Plate w/ 3/8th Barbs. I made a sandwhich with 2 peltier's and the cold plate in the center. Pure aluminum block and brass barbs. $35

2. TE Technologies 172 watt Peltier / TEC. max 24.6volts & 11.3 amps. 40mm potted and wired. Brand New. 4 qty. available. $30 each shipped.

3. Camry Heat Core with threaded 1/2 connections. Yes some fins are dented but it's a nice little core. *FREE* with any other purchase, just promise to throw in a couple bucks for shipping.

4. SilverProp Cyclone 3: This waterblock, made in Australia by Silverprop is specifically designed for high-flow watercooling (more than 600L/hr) systems. It has an openflow design (no pathways, click on the above image for a picture of the core). As with all Silverprop blocks the Cyclone 3 features a copper core/base with 1/2" Integrated Hose Barbs, Nickel Plated Aluminium Top, Nylon Bolts & Thumb Nuts, Stainless Steel Springs, Flat Machined Base and gasket. It mounts through the mounting holes on the motherboard. An Intel Socket 478 mounting bracket is an optional extra. P4 bracket included whether you like it or not. Unless someone wants to buy it seperatly. $38 (used once no abuse..) original box and equipment included.

5. Swiftech MCX4000 used for about 3 months, well taken care of but one pin is missing from the cluster. otherwise awesome shape original box included. I'll throw in a vantec tornade too.
$35

6. Lytron Radiator P/N: ES0707G10. has mounts for a 172mm fan which I have available. Has 5/8ths and 1/2th barbs. I'm pretty sure it is aluminum with copper tubing but not positive ;-/
$35 ($65 with Comair Rotron Tarzan 330CFM fan!!!!)
DIMENSIONS: Approx: 9.5 x 7.5 x 3 inch w/ shroud

7. Lytron Radiator P/N:??? has mounths for (2) 170mm fans which I also have available. 1/2 barbs attached to threaded bodies. barbs are brass. I think it is aluminum housing and copper tubing but again. i can't seem to find out for sure.
$45 ($60 with 2x Comair Rotron Patriots 235 CFM ea.)
DIMENSIONS: Approx: 17 x 8.25 x 2.5 inch

8. <not pictured> Iwaki MD-70 RLZ Water Pump. 684 Gallons Per Hour....YES!!! 11.4 Gallons Per Minute 1/4 HP
$110 comes with all necessary hookups, 1/2 and 3/4 barbs.


*Please note I have lots of extra parts which I can throw in with purchases. Such as tubing, various barbs, hosing etc...Just let me know what you need and I'll see what I can throw in.

I have a roll of insulation tape and a tube of dielectric grease as well. If anyone wants either, add $6 for the grease and $4 for insulation tape. Please, I'd rather not ship these out by themselves, surely you need one of the fine items listed above ;-)


NO REASONABLE OFFER WILL BE REFUSED. For Fastest respone email my_elastic_eye@hotmail.com. THANKS

[sn_85]

ygpm.