BIX Shroud

Lothar5150 · 11-29-2003, 02:50 AM

Gent could you give me some input on this shroud for BIX

Pic 1

Pic2

winewood · 11-29-2003, 04:10 AM

Looks like a shroud.

What were you looking for? Did you hand make it? Did you buy it?

Pritorian · 11-29-2003, 09:59 AM

have more info on it? like the distance between the fan and the rad

pHaestus · 11-29-2003, 10:34 AM

looks nice. You were selling similar shrouds for Chevette cores a whole back right?

Lothar5150 · 11-29-2003, 11:52 AM

winewood- I designed it and injection molded it.

Pritorian-with the neoprene gasket it is approx 1"

pHaestus-Thanks! Yes but I had to go to Iraq. By the way, I still make those as well

Pritorian · 11-29-2003, 02:20 PM

Well then it should work very well

Btw good craftsmanship there!

winewood · 11-29-2003, 02:37 PM

Very nice. I had no idea that was made by you.

the lines are clean and very nice. How much do you sell something like that for?

Lothar5150 · 11-30-2003, 02:04 AM

Thanks Pritorian

winewood I haven't settled on a price but it will be very reasonable

modtheplanet · 12-01-2003, 01:48 PM

how much would it cost for you to make a shroud for the fedco 2199?

Lothar5150 · 12-01-2003, 02:07 PM

Quote:

Originally posted by modtheplanet
how much would it cost for you to make a shroud for the fedco 2199?

I certanly could do it but how many people have heatercores this size?

modtheplanet · 12-01-2003, 03:54 PM

Quote:

Originally posted by Lothar5150
I certanly could do it but how many people have heatercores this size?

that i do not know

BrianW · 12-01-2003, 09:07 PM

I need two....

Brian

Lothar5150 · 12-01-2003, 11:50 PM

Quote:

Originally posted by BrianW
I need two....

Brian

Give me a few weeks

pHaestus · 12-01-2003, 11:56 PM

which one is fedco 2199? Same as 1970 Blazer (dual 120mm single pass)? If so I also have 2 of those

This IS procooling and not "easy to fit in a midtower cooling" after all

modtheplanet · 12-02-2003, 12:26 AM

pretty sure the 2199 is dual pass

link

BrianW · 12-02-2003, 09:26 PM

Yep double pass....

another link!

Brian

11-29-2003, 02:50 AM	#1
Lothar5150 Cooling Savant Join Date: Jun 2002 Location: Surf City USA Posts: 433	BIX Shroud Gent could you give me some input on this shroud for BIX Pic 1 Pic2 Last edited by Lothar5150; 12-12-2003 at 09:55 PM.

11-29-2003, 04:10 AM	#2
winewood Cooling Savant Join Date: Nov 2002 Location: in my chair Posts: 574	Looks like a shroud. What were you looking for? Did you hand make it? Did you buy it? __________________ -winewood-

11-29-2003, 09:59 AM	#3
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	have more info on it? like the distance between the fan and the rad __________________ Boo!

11-29-2003, 10:34 AM	#4
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	looks nice. You were selling similar shrouds for Chevette cores a whole back right? __________________ Getting paid like a biker with the best crank... -MF DOOM

11-29-2003, 11:52 AM	#5
Lothar5150 Cooling Savant Join Date: Jun 2002 Location: Surf City USA Posts: 433	winewood- I designed it and injection molded it. Pritorian-with the neoprene gasket it is approx 1" pHaestus-Thanks! Yes but I had to go to Iraq. By the way, I still make those as well Last edited by Lothar5150; 11-29-2003 at 01:01 PM.

11-29-2003, 02:20 PM	#6
Pritorian Cooling Savant Join Date: Sep 2002 Location: Norway Posts: 201	Well then it should work very well Btw good craftsmanship there! __________________ Boo!

11-29-2003, 02:37 PM	#7
winewood Cooling Savant Join Date: Nov 2002 Location: in my chair Posts: 574	Very nice. I had no idea that was made by you. the lines are clean and very nice. How much do you sell something like that for? __________________ -winewood-

11-30-2003, 02:04 AM	#8
Lothar5150 Cooling Savant Join Date: Jun 2002 Location: Surf City USA Posts: 433	Thanks Pritorian winewood I haven't settled on a price but it will be very reasonable

12-01-2003, 01:48 PM	#9
modtheplanet Cooling Neophyte Join Date: Oct 2003 Location: PA Posts: 14	how much would it cost for you to make a shroud for the fedco 2199?

12-01-2003, 09:07 PM	#12
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	I need two.... Brian __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

12-01-2003, 11:56 PM	#14
pHaestus Big Player Making Big Money Join Date: Aug 2001 Location: irc.lostgeek.com #procooling.com Posts: 4,782	which one is fedco 2199? Same as 1970 Blazer (dual 120mm single pass)? If so I also have 2 of those This IS procooling and not "easy to fit in a midtower cooling" after all __________________ Getting paid like a biker with the best crank... -MF DOOM

12-02-2003, 12:26 AM	#15
modtheplanet Cooling Neophyte Join Date: Oct 2003 Location: PA Posts: 14	pretty sure the 2199 is dual pass link

12-02-2003, 09:26 PM	#16
BrianW Cooling Savant Join Date: Jun 2001 Location: Desert City in California Posts: 631	Yep double pass.... another link! Brian __________________ Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core \| Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose). Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently. Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)