first H2O setup...help!

stryker_37 · 06-10-2001, 04:49 PM

i'm getting ready to buy the parts for a watercooling rig...i have the computer, the specs are below. i've decided on a mag-drive pump, a danger dan maze2, a cube radiator, a panaflow 120mm L1A fan, and the usual complement of tubing and clamps. i havent decided whether to go for an inline or a resevoir based system. if i went for the res system, i'd go for the www.freakincold.com aluminum tank with submersible 400gph pump (or i could buy the res and get the mag-drive separately), they say it seals tight.
basically i want moderate efficiency for now, it NEEDS to be QUIET and LOW MAINTENANCE, transportability is not as important, but it may help a bit. any help is welcomed.

stryker_37 · 06-10-2001, 04:50 PM

not panaflow...panaflo...doh!

stryker_37 · 06-10-2001, 04:56 PM

just took a look at OC-WC, maybe the black ice rad would fit in my mid-tower better?

mkosem · 06-10-2001, 06:27 PM

l1a's have poor air flow through radiators

--MAtt

stryker_37 · 06-11-2001, 12:56 AM

so a H1A would be the better choice? and also what radiator would you recommend?

stryker_37 · 06-11-2001, 02:57 PM

bump

06-10-2001, 04:49 PM	#1
stryker_37 Cooling Neophyte Join Date: Jun 2001 Posts: 5	first H2O setup...help! i'm getting ready to buy the parts for a watercooling rig...i have the computer, the specs are below. i've decided on a mag-drive pump, a danger dan maze2, a cube radiator, a panaflow 120mm L1A fan, and the usual complement of tubing and clamps. i havent decided whether to go for an inline or a resevoir based system. if i went for the res system, i'd go for the www.freakincold.com aluminum tank with submersible 400gph pump (or i could buy the res and get the mag-drive separately), they say it seals tight. basically i want moderate efficiency for now, it NEEDS to be QUIET and LOW MAINTENANCE, transportability is not as important, but it may help a bit. any help is welcomed. __________________ Athlon T-Bird 750@1000 Vcore 1.85 Alpha PAL 6035 SanyoDenki Fan IWILL KK266-R @ 7.5 * 133mhz fsb 384 MB PC150 CAS2 SDRAM @ 7.5ns ASUS v7700 GeForce2 GTS IBM DeskStar ATA100 16X DVDROM, 10X4X32 CDRW, SBLive X-Gamer stryker_37 brad

06-10-2001, 04:50 PM	#2
stryker_37 Cooling Neophyte Join Date: Jun 2001 Posts: 5	not panaflow...panaflo...doh! __________________ Athlon T-Bird 750@1000 Vcore 1.85 Alpha PAL 6035 SanyoDenki Fan IWILL KK266-R @ 7.5 * 133mhz fsb 384 MB PC150 CAS2 SDRAM @ 7.5ns ASUS v7700 GeForce2 GTS IBM DeskStar ATA100 16X DVDROM, 10X4X32 CDRW, SBLive X-Gamer stryker_37 brad

06-10-2001, 04:56 PM	#3
stryker_37 Cooling Neophyte Join Date: Jun 2001 Posts: 5	just took a look at OC-WC, maybe the black ice rad would fit in my mid-tower better? __________________ Athlon T-Bird 750@1000 Vcore 1.85 Alpha PAL 6035 SanyoDenki Fan IWILL KK266-R @ 7.5 * 133mhz fsb 384 MB PC150 CAS2 SDRAM @ 7.5ns ASUS v7700 GeForce2 GTS IBM DeskStar ATA100 16X DVDROM, 10X4X32 CDRW, SBLive X-Gamer stryker_37 brad

06-11-2001, 12:56 AM	#5
stryker_37 Cooling Neophyte Join Date: Jun 2001 Posts: 5	so a H1A would be the better choice? and also what radiator would you recommend? __________________ Athlon T-Bird 750@1000 Vcore 1.85 Alpha PAL 6035 SanyoDenki Fan IWILL KK266-R @ 7.5 * 133mhz fsb 384 MB PC150 CAS2 SDRAM @ 7.5ns ASUS v7700 GeForce2 GTS IBM DeskStar ATA100 16X DVDROM, 10X4X32 CDRW, SBLive X-Gamer stryker_37 brad

06-11-2001, 02:57 PM	#6
stryker_37 Cooling Neophyte Join Date: Jun 2001 Posts: 5	bump __________________ Athlon T-Bird 750@1000 Vcore 1.85 Alpha PAL 6035 SanyoDenki Fan IWILL KK266-R @ 7.5 * 133mhz fsb 384 MB PC150 CAS2 SDRAM @ 7.5ns ASUS v7700 GeForce2 GTS IBM DeskStar ATA100 16X DVDROM, 10X4X32 CDRW, SBLive X-Gamer stryker_37 brad

06-10-2001, 06:27 PM	#4
mkosem Cooling Savant Join Date: May 2001 Location: here Posts: 494	l1a's have poor air flow through radiators --MAtt

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)