Pro/Forums - View Single Post

blue68f100 · 07-18-2007, 11:32 AM

I don't own a 520, but the procedure should be the same as my 4500. You must have the boot loader on the HD. This will allow you to get to Diaster recover page, using terminal mode. Then you can install the gsu (guardian os). So to find out what is hapening you need to connect monitor and keyboard to the 520. You will probably see failsafe bios, timing out and searching for a bootable drive.

We don't distribute copyrighted material on this site.

Please read the stickies at the top of the thread. Adaptec monitors this site.

07-18-2007, 11:32 AM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Snap Server 520 Fresh OS Install I don't own a 520, but the procedure should be the same as my 4500. You must have the boot loader on the HD. This will allow you to get to Diaster recover page, using terminal mode. Then you can install the gsu (guardian os). So to find out what is hapening you need to connect monitor and keyboard to the 520. You will probably see failsafe bios, timing out and searching for a bootable drive. We don't distribute copyrighted material on this site. Please read the stickies at the top of the thread. Adaptec monitors this site. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820