my setup (pics)

BAcon · 03-24-2005, 05:53 PM

Hi, i have now revised the setup and removed as many problems as i could from it previously

Here we go:

storm G4

silverprop HL

AQX 50z pump with oversized fittings (1/2" ID, 5/8" OD)

120.3 with 1 inch stand off

panaflow M1's

tygon r1000

oversized t piece (1/2" ID)

DD fillport

http://img.photobucket.com/albums/v2...y/IMG_0718.jpg

http://img.photobucket.com/albums/v2...y/IMG_0730.jpg

http://img.photobucket.com/albums/v2...y/IMG_0717.jpg

im crap with a cam but it gives you a good idea, what do you think?

Cheers

mike

here is a link to my previous setup http://forums.procooling.com/vbb/showthread.php?t=11151

black_dante · 03-24-2005, 09:28 PM

Hows your overclock with that dfi board?
Looks nice

BAcon · 03-25-2005, 05:24 AM

311x9 prime stable 1.65v, A64 3000 48 spaw

MaxxxRacer · 03-25-2005, 06:03 AM

looks good man... bit of an improvement from your last pics you posted.

BAcon · 03-25-2005, 08:17 AM

Quote:

Originally Posted by MaxxxRacer

looks good man... bit of an improvement from your last pics you posted.

cheers mate, tryed to everything i could, i didnt actual;ly realise the swiftech hydrx was green lol, knew it was uv but as i have no cathodes assumed it would be nice and clear

though for $3 i think its great, purple ice stained my tubes something stupid, i only got it as PIce was low and i was ordering the r1000 from sidewinders so chucked it in

zee bee · 03-25-2005, 11:41 AM

Nice lookin rig. Personally I wouldn't have used ah HL with that G4 since they are both pretty restrictive. I woulda used a much less restrictive maze4 GPU and sacrificed a few degrees on the GPU so I could get all the CPU performance that beastly G4 would allow. Just my opinion, I am sure you are very happy with it either way

BAcon · 03-25-2005, 01:43 PM

had crossed my mind but i previously used a 6002 with the HL so was a good match

Then i managed to grab a G4 from cathar and have stuck with the HL, has the test on maze4 vs HL gone underway yet btw?

03-24-2005, 05:53 PM	#1
BAcon Cooling Neophyte Join Date: Dec 2004 Location: UK Posts: 22	my setup (pics) Hi, i have now revised the setup and removed as many problems as i could from it previously Here we go: storm G4 silverprop HL AQX 50z pump with oversized fittings (1/2" ID, 5/8" OD) 120.3 with 1 inch stand off panaflow M1's tygon r1000 oversized t piece (1/2" ID) DD fillport http://img.photobucket.com/albums/v2...y/IMG_0718.jpg http://img.photobucket.com/albums/v2...y/IMG_0730.jpg http://img.photobucket.com/albums/v2...y/IMG_0717.jpg im crap with a cam but it gives you a good idea, what do you think? Cheers mike here is a link to my previous setup http://forums.procooling.com/vbb/showthread.php?t=11151 Last edited by BAcon; 04-21-2005 at 11:29 AM.

03-25-2005, 06:03 AM	#4
MaxxxRacer Cooling Savant Join Date: Sep 2004 Location: Los Angeles, Ca Posts: 310	looks good man... bit of an improvement from your last pics you posted. __________________ Excuse me, I believe you have my stapler.

03-24-2005, 09:28 PM	#2
black_dante Cooling Neophyte Join Date: Aug 2004 Location: nyc Posts: 48	Hows your overclock with that dfi board? Looks nice

03-25-2005, 05:24 AM	#3
BAcon Cooling Neophyte Join Date: Dec 2004 Location: UK Posts: 22	311x9 prime stable 1.65v, A64 3000 48 spaw

03-25-2005, 11:41 AM	#6
zee bee Cooling Neophyte Join Date: Nov 2004 Location: Florida Posts: 14	Nice lookin rig. Personally I wouldn't have used ah HL with that G4 since they are both pretty restrictive. I woulda used a much less restrictive maze4 GPU and sacrificed a few degrees on the GPU so I could get all the CPU performance that beastly G4 would allow. Just my opinion, I am sure you are very happy with it either way

03-25-2005, 01:43 PM	#7
BAcon Cooling Neophyte Join Date: Dec 2004 Location: UK Posts: 22	had crossed my mind but i previously used a 6002 with the HL so was a good match Then i managed to grab a G4 from cathar and have stuck with the HL, has the test on maze4 vs HL gone underway yet btw?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)