What are these config/debug commands?

lagunacomputer · 03-05-2006, 04:24 PM

On the side.....does anyone know what these red commands actually do EXACTLY?

config devices format dev /reinit /nocore
fsck dev /fix /fixfatal /altsb
predict (individual/mirror/span/raid) [dev,...]
resync dev
debug raid
Sdb [save|dirty|bu [now|restore deviceId|del|mm/dd/yy hh:mi periodHrs]]
fsckmode dev (read current mode)
fsckmode mode (set mode: 1-10)

blue68f100 · 03-05-2006, 07:32 PM

Some of them .... so I guess you want to know....

Some are not present in the Snap OS, apply to Gyardian OS.

The most common used is the /reinit ... It is used to reformat/init harddrives.
dev .. refer to the actual drive ID not a partition.
predict ..... is used to change configuration.

Are you wanting to experiment?
Most of the cmd are for file systems maintance and/or system check. Have seen some in the FreeBSD manual, have not used.

lagunacomputer · 03-05-2006, 08:44 PM

well not to disagree but they are in my two snaps config/debug pages running snapos 3.4 and 4

and they were made before gaurdianos was ever wrote, produced or sold........

blue68f100 · 03-06-2006, 08:11 AM

I tried some cmds when I got mine and it came back not supported on my unit. So some may work on 4x00 and up. I thought resync was for raid0. Kind of a defrag untility. FSCK.... are file system cmds. V4 has a few more cmds than v3. I've printed out the cmds as a reference, 3+ pages.

03-05-2006, 04:24 PM	#1
lagunacomputer Cooling Neophyte Join Date: Sep 2005 Location: laguna beach, ca Posts: 8	What are these config/debug commands? On the side.....does anyone know what these red commands actually do EXACTLY? config devices format dev /reinit /nocore fsck dev /fix /fixfatal /altsb predict (individual/mirror/span/raid) [dev,...] resync dev debug raid Sdb [save\|dirty\|bu [now\|restore deviceId\|del\|mm/dd/yy hh:mi periodHrs]] fsckmode dev (read current mode) fsckmode mode (set mode: 1-10)

03-05-2006, 07:32 PM	#2
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: What are these config/debug commands? Some of them .... so I guess you want to know.... Some are not present in the Snap OS, apply to Gyardian OS. The most common used is the /reinit ... It is used to reformat/init harddrives. dev .. refer to the actual drive ID not a partition. predict ..... is used to change configuration. Are you wanting to experiment? Most of the cmd are for file systems maintance and/or system check. Have seen some in the FreeBSD manual, have not used. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

03-05-2006, 08:44 PM	#3
lagunacomputer Cooling Neophyte Join Date: Sep 2005 Location: laguna beach, ca Posts: 8	Re: What are these config/debug commands? well not to disagree but they are in my two snaps config/debug pages running snapos 3.4 and 4 and they were made before gaurdianos was ever wrote, produced or sold........

03-06-2006, 08:11 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: What are these config/debug commands? I tried some cmds when I got mine and it came back not supported on my unit. So some may work on 4x00 and up. I thought resync was for raid0. Kind of a defrag untility. FSCK.... are file system cmds. V4 has a few more cmds than v3. I've printed out the cmds as a reference, 3+ pages. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)