need help for cpu wb

davis5 · 08-16-2006, 07:01 AM

i want to bild wd for 939 cpu
i need to know the dementions of the block and how deep is the cutting

Captain Slug · 08-16-2006, 09:15 AM

Question #1: What tools do you have free access to? That will largely determine where we go from as far as recomendations.

Typically your raw material for the base of a waterblock is 1/4" or less and your channel depth will be no higher than 3/16" or 4mm. The 939 socket area can fit a 2"x3" base, but around a 2"x2" base size is more typical.

BGP Spook · 08-16-2006, 09:18 AM

Edit: CURSES FOILED BY THE CAPTAIN!

Thread stickied at the top of this forum for the express purpose of mounting dimensions.
http://forums.procooling.com/vbb/showthread.php?t=8412

Look on the last page.

Captain Slug and others may be able to help you more than I.

davis5 · 08-17-2006, 03:24 AM

could you write it in milimeters?

Captain Slug · 08-17-2006, 07:45 AM

Includes both
http://www.captainslug.com/modding/mh.gif

davis5 · 08-20-2006, 12:13 PM

if i want to make it round what diameter i need to cut it
i have msi neo 2 platinum board

Captain Slug · 08-21-2006, 06:20 AM

I don't recommend going any larger than 2-1/4 inches in diameter. 2-1/2 might fit but you'll have to check clearance around the socket.

davis5 · 08-21-2006, 02:44 PM

thanks

08-16-2006, 09:15 AM	#2
Captain Slug Cooling Savant Join Date: Jan 2006 Location: VA Posts: 129	Re: need help for cpu wb Question #1: What tools do you have free access to? That will largely determine where we go from as far as recomendations. Typically your raw material for the base of a waterblock is 1/4" or less and your channel depth will be no higher than 3/16" or 4mm. The 939 socket area can fit a 2"x3" base, but around a 2"x2" base size is more typical.

08-16-2006, 09:18 AM	#3
BGP Spook Cooling Savant Join Date: Sep 2005 Location: Virginia Posts: 153	Re: need help for cpu wb Edit: CURSES FOILED BY THE CAPTAIN! Thread stickied at the top of this forum for the express purpose of mounting dimensions. http://forums.procooling.com/vbb/showthread.php?t=8412 Look on the last page. Captain Slug and others may be able to help you more than I. __________________ I can't spell, but I am working on it.

08-17-2006, 03:24 AM	#4
davis5 Cooling Neophyte Join Date: Jul 2006 Location: israel Posts: 9	Re: need help for cpu wb could you write it in milimeters?

08-17-2006, 07:45 AM	#5
Captain Slug Cooling Savant Join Date: Jan 2006 Location: VA Posts: 129	Re: need help for cpu wb Includes both http://www.captainslug.com/modding/mh.gif

08-20-2006, 12:13 PM	#6
davis5 Cooling Neophyte Join Date: Jul 2006 Location: israel Posts: 9	Re: need help for cpu wb if i want to make it round what diameter i need to cut it i have msi neo 2 platinum board

08-16-2006, 07:01 AM	#1
davis5 Cooling Neophyte Join Date: Jul 2006 Location: israel Posts: 9	need help for cpu wb i want to bild wd for 939 cpu i need to know the dementions of the block and how deep is the cutting

08-21-2006, 06:20 AM	#7
Captain Slug Cooling Savant Join Date: Jan 2006 Location: VA Posts: 129	Re: need help for cpu wb I don't recommend going any larger than 2-1/4 inches in diameter. 2-1/2 might fit but you'll have to check clearance around the socket. Last edited by Captain Slug; 08-21-2006 at 07:38 PM.

08-21-2006, 02:44 PM	#8
davis5 Cooling Neophyte Join Date: Jul 2006 Location: israel Posts: 9	Re: need help for cpu wb thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)