Unable to access Admin Page Snap 2200

[mrbostn]

Hi I've got a strange issue,

I have a snap 2200, 4.x OS. After attempting to enable jvm via the command line, my snap suddenly rebooted, now I am unable to get into the admin pages via the ip. I can access the shares, but when I go to a browser and enter the ip, I get a 403 error, stating "this website requires you to log in"

I still get that same 403 error if I use https.
I also reset it to defaults by using the standard method.

Anyone have ideas?

Thank you

[mrbostn]

Fixed:

I took out what I thought was the secondary drive. I stuck it into a windows pc and formated that pc. Then after swapping drives a handful of time, I stuck the formatted drive in the lower slot of the 2200, then reset it to defaults, and bam. its working now, (one one drive) I'll format the other drive the same was and stick that into the top slot, I'll then recreate the mirror.

[blue68f100]

I always use the GUI when ever possiable. JVM will install on a 2200, but it works better if a system has 128+meg. I forgot the number but it required a min of ~12-15 free meg inoder to install it.

If you turned on SSL for sys login, you may need to change a port on your browser.